40-MS86T1-MAB2HG UHD Smart Board
40-MS86T1-MAB2HG is a 4K Ultra HD smart LED TV Board. Its maximum supported resolution is (2160P) 3840×2160 pixels. This board is mostly used for TCL, Hitachi, Thomson, and Toshiba brands etc. This is a non-combo board, which means the backlight inverter driver module and the main input power supply module are not built separately; these modules will be required to complete the LED TV setup. The aspect ratio of this 4K board is 1.90:1, which is wider than 16:9. This board supports all the smart features, including Display Mirroring, MHL, Screen Casting, SmartShare, SmartView, WiFi Direct, Android, Future Ready, and Air Mouse. The RAM capacity of this board is 1 GB, and the ROM storage is 16 GB.
40-MS86T1-MAB2HG UHD board has built-in all connectivity input-output interfaces such as three HDMI inputs for connecting Digital Full HD devices like Blu-ray media players, Digital Set-top-Box, gaming consoles, and PlayStations, etc. It has two USB input ports for connecting external hard disk drives, updating software, and playing multimedia files. It has a component input for connecting analog devices. It also has the headphone output interface port. For wired internet connectivity, it has a Local Area Network interface (RJ-45) to get fast browsing results.
General Information:
Board Model: 40-MS86T1-MAB2HG
Processor: RTD2851ESA
Chassis: MS6586, MS86T
Software Version: V8-S586T02-LF1V
CPU: CA9 *2, 1.0GHz
GPU: Dual-Core MALI-400
Android Version:
Resolution: 3840×2160
Audio Power: 2x8W (16 watt 8 ohm)
Backlight Current: NA
Backlight Power: NA
USB Ports: 2
HDMI Ports: 2
CI: Yes
Component: Yes (Mini)
RJ45: Yes
Analog Tuner: PAL, DRY
Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S/S2
Wifi: Yes
Mira-Cast: Yes
SPDIF OUT: Yes
Memory (RAM): 1 GB DDR3
Storage (ROM): 16 GB EMMC Flash
Power Rating: 220V~240V 50Hz
Power Consumption: 90Watt
Firmware Name: NA
Firmware Type: EMMC Backup Dump
Product User: TCL
How to Write EMMC Backup:
- Download the given 40-MS86T1-MAB2HG EMMC backup shared in this post below
- Note the EMMC Pinouts in the given picture above
- JTAG the mainboard with the Programming Tool
- Write the EMMC data
- Done.
Note: The following 40-MS86T1-MAB2HG firmware is a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.
