LG 28LB498U LED TV
LG 28LB498U is a 28-inch 71cm Smart High Definition LED TV with a maximum supported resolution of 1366×768 (HD Ready). It is a direct LED TV with great features. Its sound output is a 10-watt (5W+5W) RMS MS10 Dolby Digital Plus one-way speaker system. It features a Digital/Analog tuner supporting DVB-T, DVB-T2, DVB-C, DVB-S2, and PAL, as well as SECAM and NTSC (3.58 and 4.43) in AV-only mode. Its refresh rate is 50Hz.
The LG 28LB498U features multiple input-output interfaces for user connectivity, including AV, component, SCART, RGB, HDMI x2, MHL, USB x2, Ethernet (RJ-45), WiDi, and Miracast. It runs on the WebOS/NetCast 4.5 operating system. The wireless interface supports data transmission via the Miracast standard and Wireless Display (WiDi) content transmission technology. Additionally, it supports the WiFi Direct communication standard.
General Specifications & Features:
Make: LG
Model: 28LB498U-ZG
Chassis: LD46S/LE46S
Display Size: 27.5″
HD Technology: HD
Panel: HC275EXN-ABDR2
Display Format: 720P High Definition
Screen Type: LED
Features Format: Smart
OS Version: WebOS
Processor: Dual-Core 0.9 GHz
Graphics Processor: 2-Core
RAM Capacity: GB
Storage Memory: 4 GB ROM
Screen Resolution: 1366×768
No of HDMI Ports: 2
No of USB Ports: 2
Wi-Fi Type: Wi-Fi
Built-In Wi-Fi: Yes
Ethernet (RJ45): Yes
Scart: Yes
Speaker Output: 10W (5W+5W)
Tuner: DVB-T, DVB-T2, DVB-C, DVB-S2
Firmware Type: EMMC Backup
NAND Memory: THGBM
Main Board: EAX65588503
Power Rating: 19V
Power Consumption: 2.7 Amp
Note: The following firmware is an EMMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and lack knowledge of loading, installing, or updating software, firmware, or dump files, or are experiencing issues during firmware installation, please visit and read this information first.
LG 28LB498U Firmware for free download:
