Moonx 43AH700 Software Free Download

Moonx 43AH700 Smart LED TV

Moonx 43AH700S is a 43-inch smart Android LED TV. Its maximum supported screen resolution is 1920×1080 FHD 1080P. It features several input-output user connectivity interfaces, including a 3.5 mm headphone output jack to amplify the audio output. For connecting Analog devices, it has an RCA (Component) input interface. For connecting digital Full HD devices, it has three HDMI ports by which users can connect several full HD devices such as Blu-ray players, Playstations, Gaming consoles, Media Players, etc. It features a dual USB input interface for connecting hard disk drives and other USB devices, as well as for software upgrades.

Download Here

Moonx 43AH700 is a three-in-one Android smart LED TV motherboard. It is also called a Combo network LCD LED TV driver board. It is built with three major parts on a single PCB: the cable TV tuner, the LED backlight inverter driver controller circuit module, and the main power input supply module. This board has a 48-pin LVDS connector interface for LCD LED TV Screen Panels. It has 4 GB of storage memory capacity. The main processor is a quad-core made by Hisilicon (HV352). The graphics and sound quality of this board are excellent.

Moonx 43AH700 General Information:

Mainboard: TP.SK529S.PB803

Main Chipset: HISILICON HV352

Panel: HV430FHB-F91

CPU: Quad-Core ARM Cortex-A53

GPU: Dual-Core G52MP2

Android Version: 13

Resolution: 1920×1080

Audio Power: 2x8W (16 watts 8 ohm)

Backlight Current: 35V-52V

Backlight Power: 25W480mA

USB Ports: 2

HDMI Ports: 2

CI: Yes

Component: Yes

RJ45: Yes

Analog Tuner: PAL/SECAM/NTSC (AV) BG/DK/I/LL

Digital Tuner: DVB-T2/C/S2

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1GB DRAM

Storage (ROM): 8 GB EMMC Flash

Power Rating: 180V~240V 50/60 Hz

Power Consumption: 74 watts

Firmware Type: EMMC Backup Dump

Firmware Name: allupgrade_an12_V3520D0E_8G_512X2MB_75.bin

How to Write Moonx 43AH700 EMMC Backup:

Download the given Moonx-43AH700 EMMC backup shared in this post below
Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
JTAG the mainboard with the Programming Tool
Write the EMMC data
Done.

Note: The following Moonx-43AH700 firmware is a backup dump file. Kazmi Elecom Team is not responsible for any damage or loss resulting from uploading/downloading the firmware. First, check and verify the main board, then install the software. If you’re new and lack knowledge of loading/installing software/firmware or dump files, or are experiencing issues during firmware installation, please visit and read this first.