REALME RMV2108 Smart LED TV
REALME RMV2108 is a 43-inch 108cm smart Full HD LED TV. It has supported an FHD resolution of 1920×1080, and a Refresh Rate is 60 hertz. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming consoles, and also has more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support, 20 Watts sound output, and HDR Display viewing.
REALME RMV2108 can support Smart TV with Android version 11.0. Its motherboard is built with 1GB of RAM and 8 GB of ROM storage memory. REALME RMV2108 firmware files are given below for free of cost download to support technicians.
General Specifications & Features :
Brand/Make: REALME
Model: RMV2108
Mainboard: MB-M9216-P-BL_0012
Chipset: MT9216AAATCB
Supported Resolution: 1920×1080 FHD 1080P
Screen Format: 16:9
Operating System: Android 11
CPU: 4-core ARM Cortex-A53(64bit) 1.2GHz
GPU: Mali-450 MP3 up to 667MHz
RAM: 1 GB DDR3
ROM: 8 GB EMMC
Backlight: 60-72V 300mA,
USB Input: 01
HDMI Input: 02
Scart: Yes
VGA: No
RJ45 (LAN): Yes
Wifi: Yes
Bluetooth: 5.1
AV Input: Yes (Mini)
Sound Output: 20W DTS-HD
RF TUNER: DVB-C , DVB-S2 , DVB-T , DVB-T2
Video System: PAL/SECAM/NTSC
Power Input: 100- 240V 50/60 Hz
Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.
REALME RMV2108 Firmware for free download:
