SKYWORTH 43TB7000 Firmware Free Download

SKYWORTH 43TB7000 Smart LED TV

SKYWORTH 43TB7000 is a 43-inch FHD LED TV with Android Smart. It supports up to an HD resolution of 1920×1080 and a Refresh Rate of 50/60 hertz without 3D technology. It has dual HDMI input ports to connect full HD devices such as set-top boxes, Blu-Ray players, and gaming consoles. It features multiple USB ports for connecting external hard disk drives and other USB devices, as well as playing multimedia files. The Dolby Sound system supports 16 Watts of sound output and HDR Display viewing. It has dual Tuners (Optional) for Analog and Digital broadcasting signal reception.

SKYWORTH 43TB7000 USB bootable firmware files are given below for free of cost download to support technicians. This board is a three-in-one device, also known as a Combo Board. This is a single Printed Circuit motherboard on which the main power input Supply circuit module, Cable TV tuners, and LED Backlight inverter circuit are built together. So, there is no need for an extra module to complete the LED TV setup. Analog Signal reception is NTSC/PAL/SECAM; for Digital signal reception, the protocols are DVB-T, DVB-C, and DVB-S2.

Skyworth 43Tb7000

General Information:

Brand: Skyworth

Model: 43TB7000

Board Model: 5851-A7M32B-0P00

CPU: CA53 Quad Core 1.1 GHz

GPU: Mali470 Triple Core

Smart platform: Android 9.0

Resolution: 1920×1080

Audio Power: 2x6W (12 watts)

Backlight Current: 380-620 mA

Backlight Voltage Range: 40-114 Volt

USB Ports: 2

HDMI Ports: 2

CI: No

Component: Yes

RJ45: Yes

Analog Tuner: PAL, SECAM, NTSC

Digital Tuner: DVB-S, DVB-S2, DVB-T, DVB-T2

Wifi: Yes

Mira-Cast:

Memory (RAM): 1GB DRAM

Storage (ROM): 8 GB EMMC Flash

Power Rating: 110V~240V 50/60Hz

Power Consumption: 75Watt

Firmware Name: upgrade_loader_no_tvconfig.pkg

Firmware Type: USB Bootable

5851-A7M32B-0P00

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, visit and read here first.

SKYWORTH 43TB7000 Firmware files for free download:

Kazmi-Elecom

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!