40-MS48S1-MAD2XG LED TV Board
40-MS48S1-MAD2XG is a simple ATV Driver Motherboard intended for LCD/LED TVs. This board is embedded with TCL, Thomson, Tornado Brands, etc. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. For complete setup, the power input module and LED Backlight Inverter driver Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like dual HDMI inputs, dual USB input interface, PC input (VGA Port), Component Input mini 3.5mm Jacks, Cable TV Tuner, and Scart (optional).
Its USB interface can be used for upgrading software/firmware and for playing multimedia files as well. It can also support Earphone output. 40-MS48S1-MAD2XG is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can support 32 to 43-inch HD and FHD panel screens. The main processor is made by Mstar and its graphics are also good. 40-MS48S1-MAD2XG firmware files are given below for the technician’s support.
General Features and Technical Specifications:
Brand/Mark: Universal Board
Model: 40-MS48S1-MAD2XG
Main Chip: MST6M48RVS-LF-Z1-TZ
Product: LCD/LED TV
LED Backlight: mA
Flash IC: 4Mb
Sound Chip:
Tuner: F25WT-38-E
Screen supported: inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 12V DC
Firmware Name: NA
Firmware Type: Backup Dump
Service Code:
Source/Input
Caution:
All the pictures and specification details related to 40-MS48S1-MAD2XG in this post are for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Occasionally, the fault is different as per the visual compliances. So, please do n’t try it at home.
Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.
40-MS48S1-MAD2XG firmware for free download:
- 40.MS48S1-MAD2XG-TCL-LED32-DUMP
- 40.MS48S1-MAD2XG-TCL-LED42-DUMP
- 40.MS48S1-MAD2XG-THOMSON-LE40-DUMP
- 40.MS48S1-MAD2XG-TORNADO-32ED-DUMP
For video tutorials, visit “Kazmi Elecom” my YouTube channel.
