STARMAX 3000 SPARK Satellite Receiver
STARMAX 3000 SPARK dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of STARMAX 3000 SPARK receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the STARMAX 3000 SPARK receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver STARMAX 3000 SPARK does not turn on. In this situation, we need to reprogram the flash ic of the STARMAX 3000 SPARK receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of STARMAX 3000 SPARK is shared for the technician/user support.
Information and Specifications of STARMAX3000 SPARK:
Manufacturer: STARMAX
Box Model: 3000 SPARK
Main Board: ALI3510A-S14064
Main Controller or Chipset: ALI3510A
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: 25LQ032
Flash Size: 4 MB
Software Type: Backup Dump
Software Size: 3.17 MB
Download File Format: ZIP
Download Type: Free
Note:
Given STARMAX 3000 SPARK receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the STARMAX 3000 SPARK dump file free download.
