CV110-AL Universal LCD/LED TV Board
CV110-AL is a universal jumper board with multi-resolution panel screen-supported software. This is a non-combo board which means no power supply module is built-in in the motherboard. So, a separate power supply of DC 12V will be required to get it operational. A fixed power supply module is required that can be AC to DC power Kit module or DC Adapter. This board supports all the essential connectivity interfaces for the user’s requirements.
Basic Info:
Model No. CV110-AL
Main Chipset: HI3731
Display Format: up to 1920×1200 (FHD)
Supported Screens: up to 42″
Aspect Ratio: 4:3, 16:9 & 16:10
Tuner: AB253
TV Format: Analog Signal
Sound IC: NS4165
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: LVDS Double 6/8
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohms)
Screen voltage: 3.3V / 5V / 12V (Jump cap)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 3-5 Amp
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.
How to Upgrade CV110-AL Program:
- Copy the Required bin file in FAT32 USB Disk
- Plugin the U disk into the Mainboard USB port of LCD/LED TV
- Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
- Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
Input 2580
Firmware Name: CV110.bin
Firmware Type: USB upgradeable
Caution:
All the pictures and specification details related to CV110-AL in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.
Pros:
There are many advantages to installing the given CV110-AL USB software or backup dump file. A few benefits are described below:
- The dead board can be recovered and operational by loading the given software backup file
- Remote and Logo may change at your own choice to satisfy the customer
- Money saving instead of changing the mainboard
- Time-saving instead of arranging a new board
- Customer satisfaction to do an urgent job
- Skill and confidence improvement
Cons:
There may be some disadvantages to installing the given CV110-AL USB software or backup dump file. But it depends on the technician or user as per his understandings. A few drawbacks are described below:
- The working board may go to the standby position
- Remote Control may not work and the Logo may change by writing the given software
- Panel screen parameters may be changed
CV110-AL Version Upgrade:
Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only in case the default software malfunctions due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.
CV110-AL Board Replacement:
If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications and latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.
Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
How to Download CV110-AL Firmware files:
Download your required CV110-AL resolution file and then extract them you will get the folder. Now copy the bin and txt files to USB. For more Details about the download process watch the video Click Here
CV110-AL Firmware All resolutions Free Download Here :
| S.NO. | BOARD/DESCRIPTION | DOWNLOAD LINK |
|---|---|---|
| 1 | CV110-AL_1024x768_Firmware | Download |
| 2 | CV110-AL_1280x1024_Firmware | Download |
| 3 | CV110-AL_1366x768_Firmware | Download |
| 4 | CV110-AL_1400x1050_Firmware | Download |
| 5 | CV110-AL_1440x900_Firmware | Download |
| 6 | CV110-AL_1600x900_Firmware | Download |
| 7 | CV110-AL_1600x1200_Firmware | Download |
| 8 | CV110-AL_1650x1080_Firmware | Download |
| 9 | CV110-AL_1680x1050_Firmware | Download |
| 10 | CV110-AL_1920x1080_Firmware | Download |
| 11 | CV110-AL_1920x1200_Firmware | Download |
Board Review:
