CV59L-A23 is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_A23 board is suitable for the Asia Pacific and the Middle East markets.CV59L.A23 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV59L A23 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-A23 firmware files are given below for the technician’s support.
General Specifications:
Brand/Mark: Universal Board
Model: CV59L_A23
Main Chip: TSUMV59XU/TSUMV59XU-Z1
Product: LED TV
LED Backlight: 45.4~52.8v/260mA
Flash IC: 4Mb
Sound Chip: 1517P
Tuner IC: 5158
Screen supported: 18.5-39 inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 220V AC
Service Code:
Source/Input+2580
Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.
How to Download Firmware Files:
Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
Input/Output Ports: HDMI, VGA, AV, SCART, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
CV56BL-L is a simple ATV Universal Driver Motherboard designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. CV56BL-L is a non-combo jumper board that is suitable for many LCD or LED panel screens. CV56BL_L required a separate power module AC or DC and LED Backlight driver module to complete the TV setup. This has all the features as per the latest requirements and connectivity ports like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack.
General Specifications:
Brand/Mark: Universal Jumper Board
Model: CV56BL- L
Main Chip: TSUMV56RUU-Z1
Product: LED TV
LED Backlight: NA
Flash IC: 4Mb
Sound IC: 1517P
Screen supported: 15-60 inch
Resolution: Up to 1920×1080
Panel Voltage: 3V, 5V, 12V
Power Input: DC 12V
Service Code:
Source/Input+2580
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here
Here are below some CV56BL-L firmware for free download:
CV551H-A50 is an analog and digital 4K UHD smart android board with a resolution of 3840×2160 supported smart android board with the latest android version of 9.0 pie. CV551H_A50 is a universe without a backlight driver circuit and power supply module. CV551H-A50 can support many panel screens from 42 inches to 65 inches with the best picture quality. CV551H.A50 has multiple connectivity ports like AV, three HDMI, USB, and Digital Triple Tuner input (DVB T/T2, C, S/S2). Its special features are the E-Share, Bluetooth, Dolby, Mirroring option, WiFi support, and inbuilt Apps. CV551H A50 firmware files are given below for the technician’s support. If you are facing any issues during firmware installation then visit and read here first.
General Specifications & Features :
Brand/Make: LCD/LED 4K Smart Driver Board
Model: CV551H A50
Supported Resolution: 3480×2160
Screen Format: 16:9
Chipset:
Platform:
Operating System: Android 9.0
CPU: Cortex A53*4 64bit
GPU: G52(2EE)MC1
RAM: 1Gb
ROM: 8Gb
Sound Output: 10Wx2
Transmission: DVB-T/T2/C/S2
Video System: PAL/SECAM
Backlight Voltage: 108V
Backlight Current: 580mA
Backlight Power: NA
AC Input: 110-220V
Firmware Name: Ctv551Upgrade.bin
Firmware Type: USB Upgradeable
Service Menu Code: Input/Source 2580
Product: HKC
Note: The following is given software for Technician’s support. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.
How to Download CV551H-A50 Firmware Files:
Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
CV920-E42 is an android network driver board with an FHD resolution of 1920×1080. CV920_E42 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. CV920 E42 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Earphones also. CV920.E42 has a LAN/RJ45 Connector interface port also for the wired internet network.
CV920-E42 is a Combo Network Triple play board that has a Digital TV tuner built-in it. The Graphics and Sound quality of the CV920_E42 android board are very good and the Response rate is very efficient. CV920.E42 china smart network board can support 32″ to 55″ screen panels. CV920-E42 firmware is available for technician support.
General Specifications:
Brand/Mark: China Universal Android WIFI Board
Main Board: CV920-E42
Main Chipset:
OS: Android 5.1/9.0
CPU: Cortex-A53 Dual Core 1.5GHz
GPU: Mali-450MP Quad Core 750MHz
Back Light V/C : 25W(30-42V 600MA) 45W(45-70V 540MA)
Ram: 512MB/768MB/1GB
Rom: 4GB/8GB
Resolution: up to 1920×1080
Panel Voltage: 12V
Tuner: ATV&DVBT
Firmware: Factory Update
Firmware Type: USB Updateable Firmware
Product: Universal
Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware Files:
Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
CV59L-G23 is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_G23 board is suitable for the Asia Pacific and the Middle East markets.CV59L.G23 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV59L G23 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-G23 firmware files are given below for the technician’s support.
General Specifications:
Brand/Mark: Universal Board
Model: CV59L_G23
Main Chip:
Product: LED TV
LED Backlight: 32v/320mA
Flash IC: 4Mb
Screen supported: 24-29 inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 220V AC
Service Code:
Source/Input+2580
Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.
How to Download Firmware Files:
Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
Videocon VML43QH0ZSA is a 43 inches 108 cm Android and Intelligent Ultra High Definition (UHD 4k 2k) Smart LED TV with a supported resolution of 3840×2160. Its screen refresh rate/Motion rate is 60 Hz. Videocon VML43QH0ZSA has a powerful wifi system. Smart UHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. Videocon VML43QH0ZSA is a 4K original quad-core Android smart Mainboard.
Videocon VML43QH0ZSA has multiple Input interface ports like USB, HDMI, AV, Earphone out, PC VGA interface, and wifi built-in with an RJ45 ethernet port for wired internet connection and smooth connectivity. The Videocon VML43QH0ZSA firmware file is given below for the technician’s support.
General Specifications:
Model No. 43
Prod/Web Model No: VML43QH0ZSA
Resolution: 3840×2160
Aspect Ratio: 16:09
OS Version: Android
CPU: Quad-Core
Ram: 512/1GB
Rom: 4 GB
Audio Power Output: 20w (10×2)
System: PAL/NTSC
WIFI Antenna: Yes (Built-in)
Mirror: Yes
DLNA/Miracast: Yes
PC Compatible: Yes (via HDMI/VGA)
TV Tuner Input: 1
HDMI: 3
YPbPr: 1 YPBPR
AV IN: 1 AV
USB Ports: 3 (2.0 & 3.0)
Power Rating: 110V~240V 50Hz/60Hz
Power Consumption: 100Watt
Firmware Type: USB Upgrade
Firmware Name: MstarUpgrade.rar
Mainboard: MSD6A918-T8E
Note: The following VML43QH0ZSA firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download VML43QH0ZSA Firmware file:
Download all parts of VML43QH0ZSA firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
GT.V56.A01 is a universal LCD/LED TV Controller board that is designed for Asian countries with jumper cap setting for all panel VCC. GT_V56_A01 supports a high screen resolution of 1920×1080 panels. GT-V56-A01 is compatible with 15-32″ LVDS screens but does not support all panels.
Basic Info:
Model No. GT.V56.A01
Main Chipset: TSUMV56
Audio: CD1517CP
Support Language: Multi
Display Format: 1080p
Max Resolution : up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt 4Amp
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software (“GT_V56_RUUL.bin”) in FAT32 USB Disk
Plug in the U disk into the Mainboard USB port of LCD/LED TV
Switch ON the power and Wait even IR indicator led flash rapidly
Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
It continues to keeps flashing and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn on also remove the u-disk
Factory Service Mode:
Input 2580, Menu 1147
Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here
T.V56.031 is a universal LCD/LED TV Controller board that is designed for Asian countries and supports the Russian menu language as well. T_V_56_031 supports a high screen resolution of 1920×1080 panels. T.V56.031 is compatible with 7-55″ LVDS screens but does not support all panels.
Basic Info:
Model No. T.V56.031
Main Chipset: TSUMV56RUU-Z1
Support Language: Russian, English, Chinese, French, Vietnamese
Display Format: 720p
Max Resolution : up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt 4Amp
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software (“VST56_4MB.bin”) in FAT32 USB Disk
Plug in the U disk into the Mainboard USB port of LCD/LED TV
Switch ON the power and Wait even IR indicator led flash rapidly
Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
It continues to keeps flashing and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn on also remove the u-disk
Factory Service Mode:
Input 2580
Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here
