CV308H-A is an analog LCD/LED TV driver motherboard that is designed for Asian markets. CV308H_A is designed with different properties and features to support the different sizes of panel screens. CV308H-A is not a combo card which means a separate power supply module will be required to operate this board. CV308H A has multiple input ports like HDMI, VGA input, USB, AV-IN, AV-OUT, etc. Some boards have a dual AV input interface and Scart with an extension board.
General Specifications:
Model: CV308H-A
Main Chipset: MSD306
Resolution Supported: 1920×1080 FHD
Aspect ratio: 16:4
Screen Supported: 32″ to 42″
Flash size: 4 MB
Tuner: TDTC-G901D
How to Download Firmware Files:
Download your required firmware file and then extract it you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
Note: Following given firmware is a backup file and can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of installing/loading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
CV3393BH-D32 is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card Also in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack.
CV3393BH-D32 is compatible with all panel screens of backlight current 350mA-600mA depending on hardware specifications. CV3393BH.D32 firmware files are shared in this post below for the technician’s support.
General Specifications:
Brand/Mark: Universal HD Three-in-One Board
Model: CV3393BH-D32
Main Chip: MSD318LUM
Product: LED TV
LED Backlight Capacity: 350mA
LED Backlight: 50~105V
Flash IC: 2/4Mb
Screen supported: 32-65 inch
Resolution: Up to 1920×1080
Panel Voltage: 12V
Power Input: 220V AC
Tuner:
Mirror Option:
Service Code:
Input
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
CV6683H-C42 is an android network driver smart led tv board with an FHD resolution of 1920×1080. CV6683H_C42 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. CV6683H C42 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well but without VGA connectivity.
CV6683H-C42 has a LAN/RJ45 Connector interface port also for the wired internet network. CV6683H_C42 is a Combo Network Triple play board that has a Digital TV tuner built-in it. The Graphics and Sound quality of the CV6683H.C42 android board are very good and the Response rate is very efficient. CV6683H-C42 china smart network board can support LED Screen Panels. CV6683H-C42 firmware is available for technician support.
General Specifications:
Brand/Make: LCD/LED Smart Driver Board
Model: CV6683H-C42
Chipset: CV6683BOHA
Supported Resolution: 1920×1080
Screen Format: 16:9
Operating System: Android 9.0
CPU: ARM A53*4@1.1GHz
GPU: Mali 470 MP3
RAM: 1 GB DDR3
ROM: 8Gb
Sound Output: 10Wx2
Backlight: 27~74 V 600mA (Depends upon Hardware)
TUNER: Analog & Digital Tuner DVB-T2
Video System: PAL/SECAM/NTSC
Power Input: 100-240 V AC
Power Consumption: 80W
Standby Power: 0.5W
Firmware: upgrade_no_tvcertificate.pkg
Firmware Type: USB Updateable Firmware
Product User: HAIER PAKISTAN
Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware Files:
Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
CV920-E42 is an android network driver board with an FHD resolution of 1920×1080. CV920_E42 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. CV920 E42 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Earphones also. CV920.E42 has a LAN/RJ45 Connector interface port also for the wired internet network.
CV920-E42 is a Combo Network Triple play board that has a Digital TV tuner built-in it. The Graphics and Sound quality of the CV920_E42 android board are very good and the Response rate is very efficient. CV920.E42 china smart network board can support 32″ to 55″ screen panels. CV920-E42 firmware is available for technician support.
General Specifications:
Brand/Mark: China Universal Android WIFI Board
Main Board: CV920-E42
Main Chipset:
OS: Android 5.1/9.0
CPU: Cortex-A53 Dual Core 1.5GHz
GPU: Mali-450MP Quad Core 750MHz
Back Light V/C : 25W(30-42V 600MA) 45W(45-70V 540MA)
Ram: 512MB/768MB/1GB
Rom: 4GB/8GB
Resolution: up to 1920×1080
Panel Voltage: 12V
Tuner: ATV&DVBT
Firmware: Factory Update
Firmware Type: USB Updateable Firmware
Product: Universal
Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware Files:
Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
TP.SK516S.PB802 is an Android network driver smart LED TV board with an FHD resolution of 1920×1080. TP_SK516S_PB802 has a powerful wifi system. Smart FHD TV With the latest Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP SK516S PB802 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to the VGA interface for computers. TP-SK516S-PB802 also has a LAN/RJ45 Connector interface port for the wired internet network.
TP.SK516S.PB802 is a Combo Network Triple play board that has the Digital TV tuner built-in in it (DTMB/DVB-C/ATSC/ISDB-T). The Graphics and Sound quality of the TP-SK516S-PB802 Android board are very good and the Response rate is very efficient. TP.SK516S.PB802 China smart network board can support up to 42″ LED Panels. TP.SK516S.PB802 firmware file is available for the technician’s support.
General Specifications:
Brand/Mark: CVTE Main Board (Android WIFI Network Drive Smart Board)
Main Board: TP.SK516S.PB802
Main Chipset: MT9256AAATAB
Operating System: Android 11.0
CPU: Multi Core Arm Cortex A53 64-bit
GPU: CA55*4
CPU Frequency: 1.2GHz
GPU Frequency: 432MHz
RAM: 1GB
ROM: 8 Gb
Resolution: up to 1920×1080
Screen Size supported: 24 to 43 Inch
Audio Output power: 2x10W
Mirror Mode: Yes
Logo Change: Yes
Bluetooth: Yes
Tuner: RAFAEL R842/RAFAEL RT710(DVBS)
ATV System: PAL, SECAM,NTSC
DTV System: DVB-T, DVB-C, DVB-S2
Input Voltage: 200-240V AC
Firmware Name: allupgrade516_8GB_1GB_ref00.bin
Firmware Type: EMMC BACKUP
Caution:
All the pictures and specification details related to TP.SK516S.PB802 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.
Pros:
There are many advantages to installing the given TP.SK516S.PB802 USB software or eMMC backup dump file. A few benefits are described below:
The dead board can be recovered and operational by loading the given USB software or EMMC backup file
Remote and Logo may change at your own choice to satisfy the customer
Money saving instead of changing the mainboard
Time-saving instead of arranging a new board
Customer satisfaction to do an urgent job
Skill and confidence improvement
Cons:
There may be some disadvantages to installing the given TP.SK516S.PB802 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:
The working board may go to the standby position
Remote Control may not work and the Logo may change by writing the given software
Panel screen parameters may be changed
TP.SK516S.PB802 Android Version Upgrade:
Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.
TP.SK516S.PB802 EMMC Backup:
This board has a 4/8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard TP.SK516S.PB802 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.
TP.SK516S.PB802 Board Replacement:
If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.
Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
How to Download TP.SK516S.PB802 Firmware Files:
Download all parts of the following given firmware/Software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
Customer Configuration Files. Some LCD/LED TV Universal Android Smart Boards like Cultraview manufacturer (CV338) have the feature to change the Logo, Background image, Wall screen, Remote, Panel Resolution, Screen parameters, and Animations with the easy method by USB disk. It means you can modify or change or update the said items in your LED TV by your own Choice.
These files are in a specific name and format and are called Customer Configuration Files. Mostly we use the Remote IR Configuration Files and Logo Configuration files of our own choice. Here in this post, many user configuration files are given that may you download them free of cost and apply them according to your own requirements.
CV338_Configuration_Patch_Files
CV920_Configuration_Patch_Files
CV950X_Configuration_Patch_Files
MSD338_Configuration_Patch_Files
MSD358_Configuration_Patch_Files
ATM30_Configuration_Patch_Files
CV628H-B42_Configuration_Patch_Files
Here is the video tutorial for the idea:
Note: The following given CustomerConfig files are USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of updating/Installing these files.
How to Download:
Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
You can also download All LCD/LED TV Logo from the given link:
