Tag Archives: DAEWOO EM32A1B

T.VST59.A1 LED TV BOARD

T.VST59.A1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its multiple HDMI ports support 1.4 and its HDCP support 1.1. T_VST59_A1 is compatible with 26-60 inch screens. T.VST59.A1 is widescreen supported and also has a multi-language option. T.VST59.A1 software collection is given below for free download.

General Specifications:

Model: T.VST59.A1

Main Chipset: TSUMV59XU-Z1/TSUMV59XE

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Panel Voltage: +5V/+12V DC

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59.A1 Firmware Collection Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Dead DVR Repair:

T.MS6M181.6A LCD/LED TV Board

T.MS6M181.6A is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. T_MS6M181_6A is a non-combo board which means the main power supply is required for power input but the ATV board and LED backlight driver board is a built-in single PCB. This can also be operated by a DC 12V input power supply. The firmware files are given below for the Technician’s support. This board has multiple connectivity user interfaces like HDMI, Mini AV Port, Scart, VGA, RF antenna, USB, and Headphone Jack. T.MS6M181.6A Software files are shared in this post for the support of Technicians.

General Specifications:

Board Make: China

Board Model: T-MS6M181-6A 11253, T-MS6M181-6A 12021

Main Chipset: MST6M181VS-Lf-Z1

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V / +3.3V DC (Jumper Setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a USB Boot and Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.MS6M181.6A Firmware Collection Free Download Here :