DAHUA DH-XVR1A08 DVR
DAHUA DH-XVR1A08 DVR backup train is posted then in this post for the support of technicians to recover or repair DVR. In utmost of the cases videotape archivist is stuck on the incipiency or totem screen and does n’t fully bobble due to software conking or memoirs problems and in some other cases, DVR may not power on or have no display but only on buttress/ red light. In similar cases, there may be a software issue or tackle issue. So, first of all, if the videotape archivist is on buttress/ red light only also check the core voltage and insure that all measures are perfect and the main system IC is also normal also load the backup.
DAHUA DH-XVR1A08 DVR backup is saved from working DVR/ NVR. Be careful when writing provisory lines. Make sure that the main board or lattice are same as you bear and if possible corroborate the main processor. You should first keep the backup of old software and also write another. Always check the software backup size and flash memory size which will be the same in size. DVR/ NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup train if there’s no other option.
Technical Specifications of DAHUA DH-XVR1A08 DVR:
Manufacturer/Make/Brand Name: DAHUA
DVR/NVR Model: DH-XVR1A08
Chassis/Main Board: D181141_19880186473
Chipset/System IC/Processor:
Channel/Ports: 8 Channel
Software Version: NA
SPI Flash Memory: 16MB
Interface: VGA OUT, HDMI OUT, RCA OUT, RJ45, BNC, USB INPUT
Power Supply Input: 12C-4Amp
Power Consumption: 15w without HDD
Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
How to Download:
Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here
DAHUA DH-XVR1A08 DVR Software Backup File Free Download.
For video tutorials, visit “Kazmi Elecom” my YouTube channel.
