E-SAT HD-T20 Satellite Receiver
E-SAT HD-T20 dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of E-SAT-HD-T20 receiver. The main processor/Microcontroller retrieves the information from memory ic when it is powered on to know how to work/boot.
If the Flash IC/Memory IC of the E-SAT HD-T20 receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver E-SAT_HD-T20 does not turn on. In this situation, we need to reprogram the flash ic of the E-SAT-HD-T20 receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of E-SAT HD-T20 is shared for the technician/user support.
Information and Specifications of E-SAT_HD-T20:
Manufacturer: E-SAT
Box Model: HD-T20
Main Board: MB_G60101_V1.2
Main Controller or Chipset:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: 25L3206E
Flash Size: 4 MB
Software Type: Backup Dump
Software Size: 3.17 MB
Download File Format: ZIP
Download Type: Free
Note:
Given E-SAT HD-T20 receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the E-SAT HD-T20 dump file free download.
