ECHOLINK 9000 Xtreme Satellite Receiver
ECHOLINK 9000 Xtreme dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 9000 Xtreme receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK-9000 Xtreme receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK-9000 Xtreme does not turn on.
In this situation, we need to reprogram the flash ic of the ECHOLINK 9000 Xtreme receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK-9000 Xtreme is shared for the technician/user support.
Information and Specifications of ECHOLINK-9000 Xtreme:
Manufacturer: ECHOLINK
Box Model: 9000 Xtreme
Main Board: NA
Main Controller or Chipset:
Box Type: Digital
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: 3.33 Mb
Download File Format: ZIP
Download Type: Free
Note:
Given ECHOLINK- 9000 Xtremereceiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
ECHOLINK 9000 Xtreme dump file free download.
