Tag Archives: ECHOLINK 9000 Xtreme software

ECHOLINK 9000 Xtreme Dump File Free Download

ECHOLINK 9000 Xtreme Satellite Receiver

ECHOLINK 9000 Xtreme dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 9000 Xtreme receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK-9000 Xtreme receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK-9000 Xtreme does not turn on.

In this situation, we need to reprogram the flash ic of the ECHOLINK 9000 Xtreme receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK-9000 Xtreme is shared for the technician/user support.

Echolink 9000 Xtreme

Information and Specifications of ECHOLINK-9000 Xtreme:

Manufacturer: ECHOLINK

Box Model: 9000 Xtreme

Main Board: NA

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Memory: GD25Q32B

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: 3.33 Mb

Download File Format: ZIP

Download Type: Free

Note:

Given ECHOLINK- 9000 Xtremereceiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

Download Button Kazmi Elecom

ECHOLINK 9000 Xtreme dump file free download.

error: Content is protected !!