GALLAXY GLA-520 Satellite Receiver
GALLAXY GLA-520 dump file or Flash file is a basic boot instructions and information software program for a receiver that is written on EEPROM or Flash IC or Memory IC of the satellite receiver. When powered on the main processor/Microcontroller retrieves the information from memory to know how to work/boot if it fails to get the boot information then it may stuck on the power/red light or boot logo screen. The software version of this receiver is SCB3 V12.03.28-2.
Sometimes the Memory IC or SPI Flash of the GALLAXY GLA-520 satellite receiver is imperfect due to technical errors or Its built-in firmware/program crashes because of an error then the System IC Controller does not get any boot instructions or basic information and the satellite receiver does not turn on. The hardware version of this receiver is MM1-AVL1506T-DC-IF-ZZQ-V3.1. The dump file of GALLAXY GLA-520 is given below for technician/user support.
General Information and Technical Specifications:
Manufacturer: GALLAXY
Box Model: GLA-520
Main Board: MM1-AVL1506T-DC-IF-ZZQ-V3.1
S/W Version: SCB3 V12.03.28-2
Main Controller or Chipset: 1506T
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
Note:
Below given the GALLAXY GLA- 520 receiver software is a backup dump train and can be loaded with a Programming tool or with a haul tool in the dead receiver or can be upgraded SPI Flsh Memory or downgraded to the aged interpretation in the typically working satellite receiver with the USB Upgrade procedure or by the RS232 Upgrade Tool. Kazmi Elecom Team is n’t responsible for any type of damage/ loss as a result of uploading/ downloading the software. Always keep a backup before loading the USB software or jotting SPI flash memory.
