TCL L40B2810FE Full HD LED TV
TCL L40B2810FE is a 40-inch Full HD LED TV with a resolution of 1920×1080. L40B2810FE is a non-smart TV. L40B2810FE LED TV has all the latest features and connectivity ports as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its dynamic ratio is 150000:1 and its aspect ratio is 16:09.
Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. L40B2810FE has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. The TCL Software file is given below for the technician’s support.
General Specifications:
Make: TCL
Model: L40B2810FE
Display Size: 40″
Storage Memory: MB
HD Technology: FHD
Panel: Full HD
Screen Resolution: 1920×1080
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Supply Input: 240 V AC
Power Consumption: 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Caution:
All the pictures and specification details related to TCL L40B2810FE in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.
TCL L40B2810FE Board Replacement:
If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.
Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.
How to Program:
- Empty/Format the USB Disk in FAT32
- Copy the software “install.img” into the USB drive
- Insert the USB disk to a USB interface of LED TV
- Now keep pressing the power/standby button and power on the tv. Keep pressing until the standby light start flashing and progress screen display
- After 100 percent completion of progress bar turn off the tv remove the udisk and turn on
TCL L40B2810FE firmware free download:
