Tag Archives: Itv V59 031 Software

ITV.V29.031 Universal Board

Basic Info:

Model No. ITV.V29.031

Main Chipset: TSUMV29LU

Trademark: Leroy

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

Firmware Name: MSTFLASH.bin

Flash Ic: MX25L1605 (2MB)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: The following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download ITV.V29.031 Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more details about the download, process watch the video Click Here

ITV.V29.031 Firmware Free Download Here :

• ITV.V29.031_1366x768
• ITV.V29.031_1920x1080

ITV.V59.801 Software

ITV.V59.801 is a simple ATV Driver Motherboard intended for LCD/LED TVs. It is intended to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.

Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ITV.V59.801 firmware files are given below for the technician’s support.

Specifications:

Brand/Mark: China Universal

Model: ITV.V59.801

Chipset: TSUMV59XES-Z1

Product: LED TV

Backlight Info: 45V-63V/40Watt

Supported Resolution: 1920×1080

Service Code: Menu + 1147

Note: The following Software/firmware file is for the Technician’s support. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware files. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given Software/firmware and then extract them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

ITV.V59.801 firmware file for free download:

• ITV-V59-801_1366x768_Dump
• ITV-V59-801_1920x1080_USB

ATV.V59.A81.13 LED TV Board

ATV.V59.A81.13 is an Analog TV control board with Dual AV, which is suitable for the Asian markets. Its USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. The solution’s USB interface is available for software upgrades and multimedia playback. HDMI1.3/1.4 compliant with ARC support, HDCP1.2 compliant. The HDMI-supported version of this solution is 1.3/1.4 compatible with ARC, and HDCP supports version 1.2.

General Specifications:

Model: ATV.V59.A81.13

Main Chipset: TSUMV59XU-Z1

Video Input: ATV

Resolution Support: up to 1920×1080

Panel Volt: 3.3v, 5v, 12v

Terminal Functions: USB ,HDMI, VGA ,AV, PCAUDIOIN, TV , EARPHONEOUT,AV OUT

Key Function: TV/AV,MENU,VOL+,VOL-, CH+,CH-,POWER

OSD Language: English, Spanish, French, etc.

Audio Output: 2×3W(8Ω)

Power Input: 12v DC

Standby Power Consumption: < 0.3W(Board Only)

Service Menu Code:

Menu 1147

How to Load Software:

1. Transfer the firmware of “YDGV59_XU.bin” in the formatted USB flash disk,  then insert the USB disk into the board
2. After turning on the power, the light of the 7key button will be Red then flash red and blue.
after about 1 minute, the light stops flashing, which means the upgrade has finished.

Note: Following firmware collection is a USB boot files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

ATV.V59.A81.13 firmware of All Resolutions for free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ITV.V59.031.13 Universal LCD/LED Controller Board

Basic Info:

Model No. ITV.V59.031.13

Main Chipset: TSUMV59XU-Z1

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

ITV.V59.031.13 Firmware All resolutions Free Download Here :