Tag Archives: kazmi elecom

TP.VST59.PA551 Universal TV Board

TP.VST59.PA551 is a non-smart universal LCD/LED TV Combo Controller Board.

Basic Info:

Model No. TP.VST59.PA551 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 220mA to 300mA

Display Format: 1080 FHD

Panel Supported: 19″ t0 26″

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.VST59.PA551 Firmware Free Download:

• TP-VST59-PA551_1366x768_HISENSE_DUMP
• TP-VST59-PA551_1366x768_LLOYD_DUMP
• TP-VST59-PA551_1600x900_CONDOR_USB

For video tutorials, visit “Kazmi Elecom” my youtube channel.

MSVST29 Firmware Collection

MSVST29 Software collection is shared in this post.

Basic Info:

Model No. T.VST29.02B, T.VST29.02C, T.VST29.03B, T.VST29.A8

Main Chipset: TSUMV29, TSUMV39, TSUMV59

Trademark: Leroy

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Screen Supported: 8.9-42 inch

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS single 6 single 8 -bis 6 -bis 8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt, 4 Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: Following MSVST29 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MSVST29 Firmware File:

Download all parts of the following MSVST29 firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MSVST29 Firmware All resolutions Free Download Here :

RUBIN RB-22SE9FT2C LED TV

RUBIN RB-22SE9FT2C is a 22 inches HD Ready LED TV with a resolution of 1366×768. RB-22SE9FT2C is a non-smart tv. RB-22SE9FT2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-22SE9FT2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-22SE9FT2C

Display Size: 22″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-22SE9FT2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-22SE1FT2C LED TV

RUBIN RB-22SE1FT2C is a 22 inches HD Ready LED TV with a resolution of 1366×768. RB-22SE1FT2C is a non-smart tv. RB-22SE1FT2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-22SE1FT2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-22SE1FT2C

Display Size: 22″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-22SE1FT2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-39D9T2C LED TV

RUBIN RB-39D9T2C is a 39 inches HD Ready LED TV with a resolution of 1366×768. RB-39D9T2C is a non-smart tv. RB-39D9T2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-39D9T2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-39D9T2C

Display Size: 39″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-39D9T2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-32D9T2C LED TV

RUBIN RB-32D9T2C is a 32 inches HD Ready LED TV with a resolution of 1366×768. RB-32D9T2C is a non-smart tv. RB-32D9T2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-32D9T2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-32D9T2C

Display Size: 32″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-32D9T2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-39K105T2C LED TV

RUBIN RB-39K105T2C is a 39 inches HD Ready LED TV with a resolution of 1366×768. RB-39K105T2C is a non-smart tv. RB-39K105T2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-39K105T2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-39K105T2C

Display Size: 39″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-39K105T2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-24SE5T2C LED TV

RUBIN RB-24SE5T2C is a 24 inches HD Ready LED TV with a resolution of 1366×768. RB-24SE5T2C is a non-smart tv. RB-24SE5T2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-24SE5T2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-24SE5T2C

Display Size: 24″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-24SE5T2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RUBIN RB-24SE7T2C LED TV

RUBIN RB-24SE7T2C is a 24 inches HD Ready LED TV with a resolution of 1366×768. RB-24SE7T2C is a non-smart tv. RB-24SE7T2C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is RUBINal: 170 degrees and vertical: 160 degrees. RB-24SE7T2C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. RUBIN Software file is given below for the technician’s support. For more RUBIN Software collection visit here.

General Specifications & Features:

Make: RUBIN

Model: RB-24SE7T2C

Display Size: 24″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

RUBIN RB-24SE7T2C Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS18VG.72-T.VST59.A5 LCD/LED TV Board

T.MS18VG.72-T.VST59.A5 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. T_MS18VG_72-T.VST59.A5 has multiple HDMI ports support 1.4 and its HDCP support 1.1. T.MS18VG.72_T.VST59.A5 is compatible with Non-HD and FHD LCD/LED panel screens. T.MS18VG.72 T.VST59.A5 is widescreen supported and also has a multi-language option. T.MS18VG.72-T.VST59.A5 has its special feature of  AV.T.MS18VG.72-T.VST59.A5 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG-72 T.VST59.A5

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following the T.VST59.A5 firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.VST59.A5 Firmware File:

Download your required file of the following T.VST59.A5 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.MS18VG.72-T.VST59.A5 Firmware Collection Free Download Here :