Tag Archives: LA.MV56U.A Universal TV Board Software Free Download

LA.MV56U.A Universal Board

LA.MV56U.A is a multi-functional motherboard, ready to be installed on any monitor to expand its functions. The monitor becomes a modern TV and works with the remote. Also, the board with a burnt staff scaler is suitable for the repair of old monitors. A prerequisite is a working matrix. The board is built on the MStar TSUM56RUU-Z1 multimedia chip, which is the next step in the development of the V59 chip since the latter is out of production.

LA.MV56U.A supports the playback of images and video inputs, as well as reading music and movies from flash drives. The board has input interfaces VGA, HDMI, AV, and TV.

Basic Features:

Processor: TSUM56RUU-Z1

Tuner: R842

Sound amplifier: NS4263

Memory: 25Q32BVSSIG

Maximum resolution: 1920 x 1200

Screen Supported: 10-32″

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Connect the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for indicator led stops flashing
4. Done. Unplug the Udisk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is usb bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV56U.A Firmware All resolutions Free Download Here :

• LAMV56-800×600-FIRMWARE-USB
• LAMV56-1024×600-FIRMWARE-USB
• LAMV56-1024×768-FIRMWARE-USB
• LAMV56-1280×720-FIRMWARE-USB
• LAMV56-1280×768-FIRMWARE-USB
• LAMV56-1280×800-FIRMWARE-USB
• LAMV56-1280×960-FIRMWARE-USB
• LAMV56-1280×1024-FIRMWARE-USB
• LAMV56-1366×768-FIRMWARE-USB
• LAMV56-1400×1050-FIRMWARE-USB
• LAMV56-1440×900-FIRMWARE-USB
• LAMV56-1600×900-FIRMWARE-USB
• LAMV56-1600×1200-FIRMWARE-USB
• LAMV56-1680×1050-FIRMWARE-USB
• LAMV56-1920×1080-FIRMWARE-USB
• LAMV56-1920×1200-FIRMWARE-USB
• LAMV56-3840×2160-FIRMWARE-USB

LA.MV56U.A & LA.MV56U.B

LA.MV56U.A is a flat panel TV control board designed for Asia‐Pacific and Middle-East markets. LA_MV56U_A board has excellent and mature performance. LA-MV56U-A can support LCD and LED panels, the maximum resolution supported is 1920×1080 Full HD. LA MV56U A can drive an LCD or LED panel smaller than 26 inches to get a cost‐effective and high-performance and popular flat-panel analog TV set.

LA.MV56U.B is also an LCD TV Controller Board with VGA HDMI USB Inputs, Supports Max resolution 1920×1200 and 1920×1080, LVDS panel signal output. It’s very easy to upgrade software by a USB disk for LA.MV56U.A and LA.MV56U.B.

Basic Info:

Model No. LA.MV56U.A and LA.MV56U.B

Main Chipset: TSUMV56RUU‐Z1

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in the FAT32 USB Disk
2. Connect the U disk to the Mainboard USB port of the LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV56U Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.