Tag Archives: led tv software free download

CV950X-K42 FHD Smart LED TV

CV950X-K42 is an integration board of power supply, LED driver, and smart TV board. It can receive NTSC， PAL analog television, and ATSC digital television signals. It is suitable for the market in North America or India. It is suitable for 32-42-inch PAL NTSC ASTC TV 3in1 Integrated Board Universal LCD LED TV Motherboard.

CV950X-K42’s power part is an energy-efficient ultrathin DC-line switching power supply unit, with a backlight power under 45W, The main promotion backlight voltage is between 35V-100V, And single backlight output.

Technical Specifications and Features:

• Refresh Rate Ntsc (60Hz)
• Resolution HD(1366*768), HD1080(1920*1080), HD720(1280*720), NTSC(720*480), PAL(768*576)
• Screen Size 32 Inches
• Model Number CV950X-K42
• Display Format 1080p (Full-HD)
• Interface Type Earphone, RJ45, COAX, LINE OUT, HDMI1(UART), HDMI2, HDMI3, TV, AV1, AV2, USB1, USB2
• Receiving System PAL, NTSC, SECAM
• Use Hotel TV
• Wide Screen Support Yes
• Product Name Universal LED LCD TV Motherboard
• Panel Type TFT-LCD/LED
• Panel Resolution Max.1920*1080
• Panel Interface Single/Double LVDS
• Power Input AC90-264V
• Backlight Voltage 35-50V
• With DB YES
• Screen Voltage 12V
• ATV Receiving range 48.25MHz – 863.25MHz
• Input Impedance 75Ω
• Video System PAL, NTSC
• Sound System DK, BG,I, M/N NICAM /A2
• DTV Receiving range Air: CH2~CH69 Cable: CH1~CH135
• Input Impedance 75Ω
• Video System MPEG 2 MP@HL
• Bandwidth 6M
• Modulation ATSC:8VSB QAM:64QAM, 256QAM
• Sound System MP3, AAC, WMA, RM, FLAC, Ogg
• AV Color system PAL/NTSC/SECAM
• Video Level 1Vp-p@75ohm
• HDMI Format 480i,480p,576i,576p,720p,1080i,1080p,4Kx2k
• AUDIO INPUT CVBS Audio
• Audio Level: 0.2—-2.0 Vrms
• Component Audio AUDIO OUTPUT
• Max Output power 2 X8W @ 8ohm THD≤10%
• CPU Cortex-A53 Quad Core 1.5GHz
• GPU Penta Core ARM Mali-450MP up to 750MHz
• O/S Android 7.1
• DDR3 1GB
• EMMC 4GB/8GB
• WLAN Max Data Rate 72.5Mbps
• Operating Frequency 2.4GHz （ATBM6032）
• Communications Standard IEEE 802.11b/g/n
• RJ45 NETWORK 10/100M
• Keyboard Menu，CH-，CH+，Source，VOL-， VOL+，Power

How to Write CV950X-K42 EMMC Backup:

1. Download the given CV950X.K42 EMMC backup shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK)
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following CV950X.K42 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

CV950X-K42 Firmware files for free download:

• CV950X-K42-1366×768-4G-ATVIO 39-EMMC.part01
• CV950X-K42-1366×768-4G-ATVIO 39-EMMC.part02

T.TRSX88.10B LCD/LED TV Board

T.TRSX88.10B is an LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 20-30 inches of LED panels, with a maximum resolution of up to 1920×1080. T_TRSX88_10B is a non-combo board i.e. power card and backlight driver module are required separately while the ATV board is built-in into it. T-TRSX88-10B has multiple input interface ports like USB, HDMI, AV, Headphones, and Scart ports for computer connectivity.

T TRSX88 10B for many brands of LED TVs like AKAI, DYON, TOKAI, etc. Its USB interface can be used for loading software as well as for playing multimedia files. T.TRSX88.10B support for analog TV signals. T.TRSX88.10B firmware files are given below for the technician’s support.

General Specifications:

Model: T.TRSX88.10B

Main Chipset:

Resolution Supported: 1920×1080

Flash Memory: 25Q40 25Q80

Television System: PAL (BG, DK), SECAM (BG, DK, LL)

Tuner: DIT-8S1C/T1146

Audio Output Power: 2X6 W (8Ω)

Backlight: NA

Backlight Power: W

Power Input: 12V

Power Consumption: 45W

Service Code: Menu 1147, Balance (value is “0”) +1969

Firmware Name: .bin

Firmware Type: Backup Dump

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB.

T.TRSX88.10B Firmware files for Free Download:

• T-TRSX88-10B BLAUPUNKT-23-DUMP
• T-TRSX88-10B PROSONIC-24-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

MSD3393-T7C LED TV Board

MSD3393-T7C is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. MSD3393-T7C firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: MSD3393-T7C 4714-3393T7-A2233K01

Main Chip: MSD3393

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip: 1517P

Tuner IC:

Screen supported: 32-48 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

MSD3393-T7C firmware for free download:

• MSD3393.T7C AOC-24-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F1 Universal Board

ST239-F1 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F1 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F1

Main Chip: TSUMV29LU

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 1Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: .bin

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F1 firmware for free download:

• ST239_F1 1024×768
• ST239_F1 1280×1024

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.VST29.02C Universal Board

T.VST29.02C is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. T.VST29.02C 12103

Main Chipset: TSUMV29LE/TSUMV39LE

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: CDT-3SP512-36

Sound: 1517P

Bin Name: MSTFLASH.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.VST29.02C Firmware All resolutions Free Download:

• T-VST29-02C 960×540-Firmware-USB
• T-VST29-02C 1024×502-Firmware-USB
• T-VST29-02C 1024×576-Firmware-USB
• T-VST29-02C 1024×600-Firmware-USB
• T-VST29-02C 1024×768-Firmware-USB
• T-VST29-02C 1152×768-Firmware-USB
• T-VST29-02C 1280×720-Firmware-USB
• T-VST29-02C 1280×768-Firmware-USB
• T-VST29-02C 1280×800-Firmware-USB
• T-VST29-02C 1280×854-Firmware-USB
• T-VST29-02C 1280×960-Firmware-USB
• T-VST29-02C 1280×1024-Firmware-USB
• T-VST29-02C 1366×768-Firmware-USB
• T-VST29-02C 1400×1050-Firmware-USB
• T-VST29-02C 1600×900-Firmware-USB
• T-VST29-02C 1600×1200-Firmware-USB
• T-VST29-02C 1680×945-Firmware-USB
• T-VST29-02C 1680×1050-Firmware-USB
• T-VST29-02C 1920×1080-Firmware-USB
• T-VST29-02C 1920×1200-Firmware-USB
• T-VST29-02C 2048×1152-Firmware-USB
• T-VST29-02C Panel-Firmware-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F17G Universal Board

ST239-F17G is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F17G firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F17G

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: MERGE59.bin

Firmware Type: USB Bootable

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F17G firmware for free download:

• ST239_F17G 1440×900
• ST239_F17G 1920×1080

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.VST29.02B Universal Board

T.VST29.02B is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. T.VST29.02B 11496

Main Chipset: TSUMV29LE

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: CDT-3SP512-36

Sound: 1517P

Bin Name: MSTFLASH.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.VST29.02B Firmware All resolutions Free Download:

• T-VST29-02B 960×540-Firmware-USB
• T-VST29-02B 1024×502-Firmware-USB
• T-VST29-02B 1024×576-Firmware-USB
• T-VST29-02B 1024×600-Firmware-USB
• T-VST29-02B 1024×768-Firmware-USB
• T-VST29-02B 1152×768-Firmware-USB
• T-VST29-02B 1280×720-Firmware-USB
• T-VST29-02B 1280×768-Firmware-USB
• T-VST29-02B 1280×800-Firmware-USB
• T-VST29-02B 1280×854-Firmware-USB
• T-VST29-02B 1280×960-Firmware-USB
• T-VST29-02B 1280×1024-Firmware-USB
• T-VST29-02B 1366×768-Firmware-USB
• T-VST29-02B 1400×1050-Firmware-USB
• T-VST29-02B 1440×900-Firmware-USB
• T-VST29-02B 1600×900-Firmware-USB
• T-VST29-02B 1600×1200-Firmware-USB
• T-VST29-02B 1680×945-Firmware-USB
• T-VST29-02B 1680×1050-Firmware-USB
• T-VST29-02B 1920×1080-Firmware-USB
• T-VST29-02B 1920×1200-Firmware-USB
• T-VST29-02B 2048×1152-Firmware-USB
• T-VST29-02B Panel-Firmware-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F23C LED TV Board

ST239-F23C is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F23C firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F23C

Main Chip: TSUMV29LU/TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 2Mb

Sound Chip: 1517p

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F23C firmware for free download:

• ST239-F23C 1366×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUG7.820.1283 LED TV Board

JUG7.820.1283 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUG7.820.1283 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUG7.820.1283

Chassis: LS18

Main Chip: MST721DU-LF

Product: LCD TV

LED Backlight: mA

Flash IC: 25Q32

Sound Chip:

Tuner IC: ATV

Screen supported: 29-49 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUG7.820.1283 firmware for free download:

• JUG7-820-1283 SABA-46-DUMP
• JUG7-820-1283 NPG-32-DUMP
• JUG7-820-1283 GRUNDIG-32-DUMP
• JUG7-820-1283 CROWN-29-DUMP
• JUG7-820-1283 CHANGHONG-29-DUMP
• JUG7-820-1283 CHANGHONG EC47F4N-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

P65-59S V6.4 LED TV Board

P65-59S V6.4 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. P65-59S V6.4 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: P65-59S V6.4 B41117

Main Chip: TSUMV59XUS-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32-inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: MERGE.bin

Firmware Type: USB boot & Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file and USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

P65-59S V6.4 firmware for free download:

• P65-59S-V6.4 1366X768-NAGPAL-DUMP
• P65-59S-V6.4 1366X768-ONIDA-DUMP
• P65-59S-V6.4 1366X768-ONIDA-USB
• P65-59S-V6.4 1366X768-WESTON-DUMP
• P65-59S-V6.4 1920×1080-ONIDA-DUMP
• P65-59S-V6.4 1920×1080-ONIDA-USB
• P65-59S-V6.4 1920×1080-SONY-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.