Tag Archives: M6V5.2 SOFTWARE

M6V5.2 Software Free Download

M6V5.2 Universal Board

M6V5.2 is a universal LCD/LED TV Controller board. All the information regarding software and specifications is given in this post. If you are facing any issues during firmware installation then visit and read here first.

Basic Info:

  • Model No. M6V5.2
  • Main Chipset: MSD3663LSA
  • Trademark:
  • Display Format: up to 1920×1200 @ 60Hz
  • Aspect Ratio: 4:3, 16:9 & 16:10

M6V5.2_Firmware

General Specifications:

TV System: PAL/SECAM/NTSC DVBT2

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Source/Input 2580

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

M6V5.2 Firmware All resolutions USB updateable for Free Download:

Download Button Kazmi Elecom

error: Content is protected !!