NEOSAT 450 Satellite Receiver
NEOSAT 450 dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of NEOSAT 450 receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the NEOSAT 450 receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver NEOSAT 450 does not turn on. In this situation, we need to reprogram the flash ic of the NEOSAT 450 receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of NEOSAT 450 is shared for the technician/user support.
Information and Specifications of NEOSAT 450:
Manufacturer: NEOSAT
Box Model: 450
Main Board: VS3001-S01V1.2
Main Controller or Chipset:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 MB
Software Type: Backup Dump
Software Size: 2.32 MB
Download File Format: ZIP
Download Type: Free
Note:
Given NEOSAT 450 receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the NEOSAT 450 dump file free download.
