P75-M3 V6.2 LED TV Board
P75-M3 V6.2 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 32-inch to 43-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. P75.M3 V6.2 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. P75_M3 V6.2 is compatible with Non-HD and Full HD LCD/LED panel screens. P75 M3 V6.2 is widescreen-supported and also has a multi-language option. P75_M3 V6.2 has its special feature of Dual AV extendable.P75-M3 V6.2 software collection is given below for free download.
P75-M3 V6.2 is a non-combo three-in-one LCD LED TV motherboard. It has builtin LED Backlight driver circuit, cable tv tuner, and main ac 220 power input main circuit into a single printed circuit board. It has multiple input interface as per current user requirements such as triple HDMI input ports, dual USB input ports by which the user can upgrade software and also play multimedia files and connect external hard disk drive too. This board has also multi RCA input ports, VGA connectivity interface for computer and laptop connectivity to display on big screen, cable tv tuner, and headphones out jack which can be used for the audio amplifications purpose.
General Features and Technical Specifications:
Board Make: China
Board Model: P75-M3 V6.2 A41215
Main Chipset: MSD6306U1
Backlight Volt: 45V
Backlight Current: 350mA
Backlight Power Capacity: 65w
TV System: PAL/SECAM/NTSC
Panel Interface: Single-channel or Dual-channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power
Multi-Language: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 8 Watt (8 ohms)
Panel Voltage: +5V/+12V DC (Default 12V)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: AC220 Volt
Maximum Current: 5000mA (Without Panel)
Standby Power: <0.5W
Maximum Current for USB: 500mA
Flash IC: 4MB
Firmware Type: Backup Dump
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
P75-M3 V6.2 Firmware Collection Free Download:
- P75-M3 V6.2-BRANDT-32-DUMP
- P75-M3 V6.2-BRANDT-43-DUMP
- P75-M3 V6.2-ENIE-43-DUMP
- P75-M3 V6.2-HYUNDAI-40-DUMP
- P75-M3 V6.2-CRISTOR-43-DUMP
For video tutorials, visit “Kazmi Elecom” my youtube channel.
