Tag Archives: Philips Download

PHILIPS 32PFL6306 LED TV

PHILIPS 32PFL6306 is a 32 inches HD Ready LED TV with a resolution of 1366×768. 32PFL6306 is a non-smart tv. 32PFL6306 led TV has all the latest features and connectivity ports as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 32PFL6306 has additional edge-led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2, and response time is 5 ms. PHILIPS Firmware file is given below for the technician’s support. For more PHILIPS Firmware collection visit here.

General Specifications & Features:

Make: PHILIPS

Model: 32PFL6306

Display Size: 32″

Storage Memory: 4 MB

HD Technology: HD Ready

Panel: HD

No of HDMI Ports: 1

No of USB Ports: 1

No of AV Ports: 2

Speaker Output RMS: 10W (5W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 45 W, 0.5 W (Standby)

Firmware Type: Backup Dump

Firmware Name:

Main Board:

PHILIPS 32PFL6306 Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD but keep in mind the price should be varies according to the dollar rate in Pakistan. convert the dollar rate in rupees to get the approximate price in PKR. You can also convert the dollar rate in Indian rupees to get the local currency value.

Note: Following given Firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Firmware.

PHILIPS 32PFL6306 Firmware file free download.

For Video Tutorials Visit my youtube Channel

Philips LCD/LED TV Software Collection

Philips LED TV is widely used in Pakistan. Each and Every Philips LED TV has its specific program or firmware/software installed in its motherboard by which the TV functions can be operated. Sometimes, In some cases led TV stop working due to technical reasons and does not properly display or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the TV to normal condition. So, here are some backup dump files of Philips LED TV firmware for free Download to support the technicians. Download free Philips bin files for your LED TV. If you are facing some issues during software installation then read here first.

All following given firmware of Philips LED TV is useable and dump files are backed up with a programming tool and can be loaded into the tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in the new flash ic then mount it. In case of any trouble, you can replace back the original flash to avoid any issues.

Philips LED TV boards do not have the option of Mirroring/flipping or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such type of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All Dump files are saved from working Philips LED TVs with the help of the Programming tool and can be loaded or written by the programmer. These firmware files may not support the USB upgrade method.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware.

How to Download:

Download the following given firmware and extract/unzip. Now copy the file to USB. for More Detail about the download process watch the video Click Here

Philips LED TV Firmware For Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV