RSAG7.820.12367 LED TV Board
RSAG7.820.12367 is a HD and FHD DVB LED TV Android Smart Board. It has a supported up to Full HD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz without 3D technology. It has dual HDMI input ports to connect full HD devices such as set-top boxes, Blu-Ray players, and gaming consoles. It has more than one USB port to connect external hard disk drives and other USB devices and for playing multimedia files as well. It has a Dolby Sound system that Supports 20 Watts sound output and HDR Display viewing. It has dual Tuners for Analog and Digital broadcasting signal reception.
RSAG7.820.12367 can support the Smart TV Features as Android. RSAG7.820.12367 firmware files are given below for free of cost download to support technicians. This board is three-in-one and is also called a Combo Board. This is a single Printed Circuit motherboard on which the main power input Supply circuit module, Cable TV tuners, and LED Backlight inverter circuit are built together. So, there is no need for an extra module to complete the LED TV setup. Analog Signal reception is NTSC/PAL/SECAM and for Digital signal reception the protocols are DVB-T, DVB-T2, DVB-C, DVB-S, and DVB-S2.
General Features & Specifications:
Brand: China
Board Model: RSAG7.820.12367/ROH
Display Format: Full HD 1080P
Screen Type: LED
Features Format: Smart
OS Version: Android
Chipset: Mstar
Processor: Dual-Core
Graphic Processor: Dual-core
RAM Capacity: GB DDR3
Storage Memory: GB ROM
Screen Resolution: 1920×1080
No of HDMI Ports: 2
No of USB Ports: 2
Wi-Fi Type: Wi-Fi
Built-In Wi-Fi: Yes
Ethernet (RJ45): Yes
Speaker Output: 20W (10W*2)
Tuner: ATV/DTV (NTSC/PAL/SECAM)/(DVB-T, DVB-T2, DVB-C, DVB-S, DVB-S2)
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: 65 W
Firmware Type: EMMC Backup
Firmware Name: NA
Product: Hisense
Caution:
All the pictures/snaps, features, descriptions, and specification details related to the mainboard RSAG7.820.12367 in this post are for reference only. If you are a domestic user and do not have any repairing experience or lack knowledge about electronics, then you should visit the nearest expert technician first without loading the software/firmware or emmc backup file. Sometimes, by the visual observations, the fault is different from the original. So, please do not open your LED TV and try it at home. Only if the smart LED TV is slow or some applications malfunctioning then reset the LED TV to Factory Default only to clear cache memory.
RSAG7.820.12367 EMMC Backup:
This board has a 4 eMMC storage memory. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard RSAG7.820.12367 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.
Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
How to Download Firmware File:
Download all parts of the following emmc backup firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
RSAG7.820.12367 Firmware for free download:
