STARCOM HD8860 Satellite Receiver
STARCOM HD8860 dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.
If the Flash IC/Memory IC of the STARCOM HD8860 receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of STARCOM HD8860 is given below for technician/user support.
Information and Specifications:
Manufacturer: STARCOM
Box Model: HD8860
Main Board:
Main Controller or Chipset:
Box Type: Digital
Flash Type: SPI SOP8/SOIC8
Flash Size: 8 Mb
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
Note:
Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.
