SUPER MAX SM-F26HD+PRIME Satellite Receiver
The SUPER MAX SM-F26HD+PRIME dump file, also known as the Flash file, contains essential boot instructions and information for the satellite receiver. This software is stored on the EEPROM, Flash IC, or Memory IC of the device. When the receiver is powered on, the main processor or microcontroller accesses this memory to determine how to boot. If it fails to retrieve the necessary boot information, the device may become stuck on a power/red light or the boot logo screen.
In some cases, the Memory IC or SPI Flash of the SUPER MAX SM-F26HD+PRIME satellite receiver may malfunction due to technical issues, or the built-in firmware may crash, preventing the System IC Controller from receiving the required boot instructions. As a result, the satellite receiver may fail to power on. To resolve this issue, it is necessary to reprogram the Flash IC using a compatible hardware dump or Flash file. Below is the dump file for the SUPER MAX SM-F26HD+PRIME, provided for the support of technicians and users.
General Information and Technical Specifications:
Manufacturer: SUPER MAX
Box Model: SM-F26HD+PRIME
Main Board:
Main Controller or Chipset:
Box Type: Digital
Flash Type: SPI SOP8/SOIC8
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
How to Install:
- Download the given SUPER MAX SM-F26HD+PRIME Dump file
- Unzip the file to folder
- Copy the bin file to the USB disk or keep it on the hard disk
- Remote the Flash IC from the Receiver PCB board
- Connect the programming tool
- Put the Flash ic on the Programmer
- Write the Flash ic with the required dump file
- Resold it back to the receiver motherboard
- On the receiver Now its working
Note:
The SUPER MAX SM-F26HD+PRIME receiver software provided below is a backup dump file. It can be loaded using a programming tool or a loader tool on a non-functional receiver, or it can be used to upgrade or downgrade the SPI Flash Memory of a functioning satellite receiver through the USB upgrade process or the RS232 upgrade tool. Please note that the Kazmi Elecom Team is not liable for any damage or loss that may occur from uploading or downloading the software. Always ensure you have a backup before loading the USB software or writing to the SPI flash memory.
