Tag Archives: T.V56.03 Software Free Download

T.V53.03 Universal LCD/LED TV Controller Board

T.V53.03 is a universal LCD LED TV Controller Driver board with a Jumper Cap setting.

Basic Info:

Model No. T.V53.03

Main Chipset: TSUMV53RUU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

TV Format: Analog Signal

Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Double 6

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Screen voltage: 3.3V / 5V / 12V (Jump cap)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3-5 Amp

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Firmware Name: VST53C_4MB_M.bin

Firmware Type: USB upgradeable

Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given firmware/software is USB upgradeable. Download all parts of the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch video Click Here

T.V53.03 Firmware All resolutions Free Download Here :

T.V56.03 Universal LCD/LED Controller Board

T.V56.03 is a small universal LCD/LED TV Driver Controller Board with DC input power and Jumper cap setting for Panel VCC.

Basic Info:

Model No. T.V56.03

Main Chipset: TSUMV56RUU-Z1

Trademark:

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flashing in speed
4. Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)
5. It continues to flash and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk

Factory Service Mode:

Menu+1147

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load with Programmer. For More Detail about the download process, watch the video Click Here

T.V56.03 Firmware All resolutions Free Download Here :