Tag Archives: T.VST29.02C program data

T.VST29.02C Universal Board

T.VST29.02C is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. T.VST29.02C 12103

Main Chipset: TSUMV29LE/TSUMV39LE

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: CDT-3SP512-36

Sound: 1517P

Bin Name: MSTFLASH.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.VST29.02C Firmware All resolutions Free Download:

• T-VST29-02C 960×540-Firmware-USB
• T-VST29-02C 1024×502-Firmware-USB
• T-VST29-02C 1024×576-Firmware-USB
• T-VST29-02C 1024×600-Firmware-USB
• T-VST29-02C 1024×768-Firmware-USB
• T-VST29-02C 1152×768-Firmware-USB
• T-VST29-02C 1280×720-Firmware-USB
• T-VST29-02C 1280×768-Firmware-USB
• T-VST29-02C 1280×800-Firmware-USB
• T-VST29-02C 1280×854-Firmware-USB
• T-VST29-02C 1280×960-Firmware-USB
• T-VST29-02C 1280×1024-Firmware-USB
• T-VST29-02C 1366×768-Firmware-USB
• T-VST29-02C 1400×1050-Firmware-USB
• T-VST29-02C 1600×900-Firmware-USB
• T-VST29-02C 1600×1200-Firmware-USB
• T-VST29-02C 1680×945-Firmware-USB
• T-VST29-02C 1680×1050-Firmware-USB
• T-VST29-02C 1920×1080-Firmware-USB
• T-VST29-02C 1920×1200-Firmware-USB
• T-VST29-02C 2048×1152-Firmware-USB
• T-VST29-02C Panel-Firmware-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

MSVST29 Firmware Collection

MSVST29 Software collection is shared in this post.

Basic Info:

Model No. T.VST29.02B, T.VST29.02C, T.VST29.03B, T.VST29.A8

Main Chipset: TSUMV29, TSUMV39, TSUMV59

Trademark: Leroy

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Screen Supported: 8.9-42 inch

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS single 6 single 8 -bis 6 -bis 8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt, 4 Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: Following MSVST29 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MSVST29 Firmware File:

Download all parts of the following MSVST29 firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MSVST29 Firmware All resolutions Free Download Here :