Tag Archives: T.VST59.A8 SOFTWARE

T.VST59.A7 Universal LED TV Board

T.VST59.A7 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its multiple HDMI ports support 1.4 and its HDCP support 1.1. T_VST59_A7 is compatible with 10-32 inch screens. T.VST59.A7 is widescreen supported and also has a multi-language option. T-VST59-A7 has its special feature of Dual AV extendable.T.VST59.A7 software collection is given below for free download.

General Specifications:

Model: T.VST59.A7

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Panel Voltage: +5V/+12V DC

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59.A7 Firmware Collection Free Download Here :

T.VST59.A6 Universal LED TV Board

T.VST59.A6 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its multiple HDMI ports support 1.4 and its HDCP support 1.1. T_VST59_A6 is compatible with 10-32 inch screens. T.VST59.A6 is widescreen supported and also has a multi-language option. T-VST59-A6 has its special feature of Dual AV extendable.T.VST59.A6 software collection is given below for free download.

General Specifications:

Model: T.VST59.A6

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Panel Voltage: +5V/+12V DC

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59.A6 Firmware Collections Free Download Here :

T.VST59.A8 & A81 Universal LED TV Card

T.VST59.A8 & A81 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1. T-VST59-A8 is compatible with 10-32 inch screens. T_VST59_A81 is widescreen supported and also has the multi-language option. T.VST59.A8 and T.VST59.A81 have the special feature of Dual AV.

T.VST59.A8 & A81 are universal boards and their main input connectivity is DC12V. These boards have also a VGA interface by which the user can connect a Laptop and Personal computer to watch bigger displays on wide screens.

General Specifications:

Model: T-VST59-A8 & T.VST59.A81

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59.A8 & A81 Firmware All resolutions Free Download Here :

• T.VST59.A8-All-Resolutions
• T.VST59.A81-All-Resolutions

T.V56.A8 HD LCD Universal Driver Board

T.V56.A8 HD LCD Universal Driver Board Dual Video Support USB Playback TV Board For V59.A81. It supports multi-OSD languages. This universal LCD control board supports a lot of panels. Max supports Full HD LCD TV main board 1920X1080 resolution TFT-LCD  14″ to 32 ” screen.

It can Dynamically adjust the picture’s color, contrast ratio, definition, and so on. It automatically detects input video format. T.V56.A8 firmware files are given below for the technicians’ support.

Basic Info:

Model No. T.V56.A8

Main Chipset: TSUMV56RUU-Z1

Tuner: R842

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes

Mirror Option: Yes

Backlight Adjust: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

• Empty the USB disk or Format in FAT32
• Copy the required resolution file (*. Bin file) with the TXT file to the USB disk
• Connect the USB disk to the mainboard
• Connect the Keyboard and TV Mainboard
• Connect the power supply, and check the keyboard light. If there is a flashing light,
  that is in the written program, waiting for the light to turn to Green, work is done.

Note: If there is no flashing light, please cut off the power supply, then connect the USB disk once
again, then connect the power supply again, and if the power supply can’t be cut off *The same firmware can only be burned once a time

Factory Service Mode:

Menu+1147

Boot Logo Setting:

• Copy your logo into the USB disk
• Connect the USB disk to the mainboard
• Find your logo in Multi-media File
• Select your logo
• Press No.”6 ” on the remote control to change to fullscreen play, then press “ok” on
  the remote control, on the bottom of the option items, there is a ” catch”, choose it.

Note: The following firmware collection is a USB bootable and a backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.V56.A8 Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more Details about the download, process watch the video Click Here

T.V56.A8 Firmware All resolutions Free Download Here :

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue

TOP-TECH TSUX9V5 LED Universal Controller

• TOP-TECH TSUX9V5.0
• TOP-TECH TSUX9V5.1
• TOP-TECH TSUX9V5.1-A
• TOP-TECH TSUX9V5.1-C
• TOP-TECH TSUX9V5.1-D
• TOP-TECH TSUX9V5.3
• VD-TSU59V5.1D-XC

Basic Info:

Model No. TSUX9V5.x

Main Chipset: TSUMV59XU-Z1 & TSUMV29LU

Trademark: TOP-TECH

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk base on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+2580

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUX9V5 Firmware All resolutions Free Download Here :

VD-TSU59V5.1D-XC

For video tutorials, visit “Kazmi Elecom” my youtube channel.