Tag Archives: top-tech

6M48V2.0 HD LCD TV Board

6M48V2.0 is an HD LCD TV Board for Asia and the Middle East, supports HDMI, AV, PC-RGB, S-Video(Option), USB, YPbPr, TV signal input, Earphone, SPDIF, CVBS.

Basic Info:

Model No. 6M48V2.0

Main Chipset: MST6M48

Trademark: TOP-TECH

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, and then connect the power supply again.

Factory Service Mode:

Menu+2580

Note: 

The following Software is a USB bootable file and can be loaded by USB disk. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

6M48V2.0 Firmware Free Download :

• 6M48 V2.0 1024×600 USB
• 6M48 V2.0 1024×768 USB
• 6M48 V2.0 1280×800 USB
• 6M48 V2.0 1280×1024 USB
• 6M48 V2.0 1366×768 USB
• 6M48 V2.0 1400×1050 USB
• 6M48 V2.0 1920×1080 USB
• 6M48 V2.0 All-Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

P45-X9 V3.1 3-in-one universal Board

P45-X9 V3.1 is a three-in-one universal integrated LED TV motherboard. P45_X9 V3.1 Drive Plate can support up to 1920×1080 resolution and 26-32″ panel screens. It can support remote control to change program resolution. P45_X9_V3.1 supports boot music, and boot LOGO, can supports flip screen, and support national standard digital DMB-TH.

General Specifications:

Brand/Mark: TOP-TECH China Universal

Model: TOPTECH P45-X9 V3.1

Main Chipset: TSUMV59XU-Z1

Product: Three-In-One LED TV Motherboard

Backlight: 18-60 volt 240mA

Supported Resolution: Up to 1920×1080

Panel: 26″ to 32″

Backlight Voltage: 22-66V 240mA to 450mA

Backlight Power: 16w

Service Code: Menu+1147

Note: The following given firmware files are dump backups. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about the download, process watch the video Click Here

P45-X9 V3.1 firmware files for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

M6V5.1 Universal LCD/LED Board

Basic Info:

Model No. M6V5.1

Main Chipset: TSUMV56RUU-Z1 (Mstar)

Trademark: TOP-TECH

Display Format: up to 1920×1200 @ 60Hz

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk base on your screen size.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again.

Factory Service Mode:

Menu+2580

Note:

M6V5.1-C is NOT compatible with board M6V5.1-A. DO NOT install on M6V5.1-A because will not work.

The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download M6V5.1 Firmware Files:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

M6V5.1 Firmware All resolutions USB updateable for Free Download:

• M6V5-1-C-1024×768-Firmware-USB
• M6V5-1-C-1280×768-Firmware-USB
• M6V5-1-C-1280×800-Firmware-USB
• M6V5-1-C-1280×1024-Firmware-USB
• M6V5-1-C-1366×768-Firmware-USB
• M6V5-1-C-1400×1050-Firmware-USB
• M6V5-1-C-1440×900-Firmware-USB
• M6V5-1-C-1600×900-Firmware-USB
• M6V5-1-C-1600×1200-Firmware-USB
• M6V5-1-C-1680×1050-Firmware-USB
• M6V5-1-C-1920×1080-Firmware-USB