Tag Archives: Tp Ms3393 Pb818 Firmware

TP.MS3393.P85 LED TV Board

TP.MS3393.P85 is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. TP_MS3393_P85 is a combo board which means the main power supply, ATV board, and LED backlight driver board is a built-in single PCB. The firmware files are given below for the technician’s support. Its TV tuner is ATSC (Digital) and NTSC. TP.MS3393.P85 firmware files are shared in this post for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: TP-MS3393-P85

Main Chip: MSD3393LU

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 220V AC

Backlight Volt: 55-62V

MAX Backlight Watt: 65w

Backlight Current: 650mA

Resolution: up to 1920×1080

Flash size: 2/4 MB

AUDIO:

Tuner: ATSC (Digital) and NTSC

Service Menu:

Source 2-5-8-0

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.MS3393.P85 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS338.PB818 Universal Smart Board

TP.MS338.PB818 is a universal smart integrated board with an Android wifi network function. TP MS338 PB818 is Three in One Network Driver Wi-Fi board that can support up to 26 to 46-inch screens. TP_MS338_PB818 can be equipped with various screens. TP.MS338.PB818 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338E-PA671 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP.MS338.PB818 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the Android board are very good and the Response rate is very efficient. TP-MS338-PB818 China smart network board can support up to 32″ screen panels. TP.MS338.PB818 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Borad Model: TP.MS338.PB818

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512Mb/1 Gb

Rom: 4Gb/8Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (26” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

TP.MS338.PB818 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.