Tag Archives: Tp Nedir

TP.MS338.PB803 Firmware

TP.MS338.PB803 is an Android network driver board with an FHD resolution of 1920×1080. TP.MS338_PB803 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP.MS338 PB803 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338-PB803 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338_PB803 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338-PB803 android board are very good and the Response rate is very efficient. TP.MS338-PB803 China smart network board can support up to 55″ screen panels. TP.MS338.PB803 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart DVB-T2 LED TV Main Board

Main Board Model: TP.MS338.PB803

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J
DVB-T2: MSD6A338SXE-WLOR MSD6A338SXE-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 1 Gb

Rom: 8 Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: up-to 1920×1080 (32” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to the TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it’s complete.
• Switch OFF, Remove the Disk, and Switch it ON again. Done

TP.MS338.PB803 firmware for free download:

Firmware Name:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.VST59S.PC815 HD LED TV Board

TP.VST59S.PC815 is designed for an LCD/LED HD TV Board that supports the screen size of 42″ to 65″. This is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard. It is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 40 pins LVDS Connector screen cable and has 4MB of program storage memory.

General Specifications:

Brand/Mark: Leory China Universal HD Three in One Board

Model: TP.VST59S.PC815

Product: LED TV

LED Backlight Current: 480MA, 720MA, 900 MA

100 HZ Supported: Yes

Flash IC: 4Mb

Screen supported: 42-65 inch

Resolution: Upto 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

How to Program:

1. Format the USB Disk with FAT32 System
2. Transfer the required resolution file into USB
3. Insert the USB into TV Motherboard USB interface
4. Connect the Keyboard&IR
5. Power on the Main Board and wait until LED light Start Flashing
6. Keep watching while the LED light stops flashing. Its Done

Note: The following firmware is a USB Boot/dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59S.PC815 firmware for free download: