Tag Archives: Tp.Rt2982.Pb801 Service Manual

TP.RT2982.PC821 Smart LED TV Board

TP.RT2982.PC821 is a network smart Android board that is designed for Asian Markets and the Middle East as well. TP_RT2982_PC821 is a full HD smart board that can support 32-46-inch LCD/LED TVs. TP-RT2982-PC821 is a new Android single-chip solution from Realtek. This is a three-in-one triple play board with a main Quad-core A7 CPU,3DGPU, and 512MB DDR3 RAM. It can also support external expansion up to 1.5G. TP RT2982 PC821 supports external 4G EMMC.

TP.RT2982.PC821 has multiple interface input ports such as Dual HDMI, Dual AV, Dual USB, VGA input interface for PC or Laptop connectivity, and RJ45 Ethernet connector for wired internet connectivity. TP.RT2982.PC821 firmware files are shared here below in this post for the support of technicians and repairing purposes.

General Specifications:

Board Model: TP.RT2982.PC821

Supported Panels: 32-46 Inch

Supported Resolution: 1920×1080 FHD

RAM: 512 Mb DDR3

ROM: 4 GB emmc

Main Processor CPU: ARM Quad-core A7

Panel Power: 5v, 12v

Backlight: 700 mA

Audio Power Output: 2x8w (8ohm)

System: PAL/NTSC

WIFI Antenna: Yes (Built-in)

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 110Watt

Service Mode:

Press the remote control: ” Menu 1 1 4 7 ” or ” Channel (signal source) 2580 ” a few boards as ” Menu 2580 ”

Caution: 

All the pictures and specification details related to TP.RT2982.PC821 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given TP.RT2982.PC821 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given TP.RT2982.PC821 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

TP.RT2982.PC821 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

TP.RT2982.PC821 EMMC Backup:

This board has a 4GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard TP.RT2982.PC821 and written by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

TP.RT2982.PC821 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.RT2982.PC821 Firmware for free download:

TP.RT2982.PB801 Smart LED TV Board

TP.RT2982.PB801 is an Analog and Digital network smart android board that is designed for 32-42 Inch LCD/LED TVs. It can support FHD resolution 1920×1080 screen panels.TP_RT2982_PB801 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Headphone also. TP-RT2982-PB801 has a LAN/RJ45 Ethernet Connector interface port also for the wired/cable internet network.

TP RT2982 PB801 is a Combo high-speed Network Triple play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built into it. The Video and Sound quality of TP.RT2982.PB801 android board are very good and the Response rate is very efficient. TP.RT2982.PB801 china smart network board has an android 4.4 version.

General Specifications:

Model: TP.RT2982.PB801

OSD Language: Chinese, English

CPU: 4-Core A7 1GHz

GPU:  2 x SGX544

DDR Size: 512MB

RAM Speed: DDR3 1600MHz

Android Version:  4.4

ROM: eMMC Flash 4G Byte

Interface: Dual/Single LVDS Interface

Resolution: 1920×1080 Maximum

Backlight Voltage:  45V-152V

Backlight Current: 400mA

Backlight Power: 45Watt Max.

Panel Power: 12V, 5V

RF Function: ATV & DTMB

Tuner: R840(IEC)

Video System: PAL/NTSC/SECAM

Audio Output Power: 2×8W(8Ω)

Power Input: 100-240V AC

Factory Setting: Menu+8893

Note: Following given firmware is USB upgradeable and eMMC backup files. Kazmi Elecom Team is not responsible for any type of damage/loss in result with loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the complete download process watch the video Click Here

How to Install Software:

• Copy the “allupgrade_2982_xx” file into USB Disk
• Insert the USB disk into the TV USB interface port
• Switch on the TV
• LED light starts flashing, wait 30 sec until the upgrade process is complete
• The TV will restart automatically. Not wait for boot. The first boot takes a long time after the upgrade

Here are below some TP.RT2982.PB801 firmware for free download:

allupgrade_2982_52.img
CP137305_ML_TP_RT2982_PB801_PAKISTAN_T390XVN01_0_REF52_AT_071f7bb8_20160226_Wisdom share

allupgrade_2982_33
CS139308_TP_RT2982_PB801_T390XVN01_IR_ML_EU_RH20_09HL05_EXX_CZ_SMART

allupgrade_2982_82
CS92482_RS_TP_RT2982_PB801_CMI_V390HJ1_P02_G51_PARMUSIC_AQY_REF82_AT

allupgrade_2982_86
CS97326_WB_RT2982_PB801_V420HJ2_P02_IR_WB_20DF_LOGO_HUALING
CS100383_WB_RT2982_PB801_LC390TU1A_IR_WB_20DF_LOGO_HALRIE_REF86_AT

allupgrade_2982_57
CS93268_TP_RT2982_PB801_ST315A04_IR_HX_AP_YS52JC_XL_001_REF57_AT_158ec177

allupgrade_2982_49
CS101997_HKC_32B7_LE32B3500W_TP_RT2982_PB801_A7_HK315LEDM_EH9YH_IR_HTR_A07_REF49

allupgrade_2982_43
le32d58s_7C01A_CP81798_XM_TP_RT2982_PB801_CHINA_LC320TU3A

allupgrade_2982_48
allupgrade_2982_sos

allupgrade_2982_45

le32d58s
LD32S86