Tag Archives: TP.RT2982.PD811

TP.RT2982.PD811 Smart LED TV Board

TP.RT2982.PD811 is a network smart android board that is designed for Asian Markets and the Middle East as well. TP_RT2982_PD811 is a full HD smart board that can support 32-46-inch LCD/LED TVs. TP-RT2982-PD811 is a new Android single-chip solution from Realtek. It has ARM Quad-core A7 CPU/3DGPU and 512M DDR3 (supports external expansion up to 1.5G).

TP RT2982 PD811 supports external 4G EMMC. TP.RT2982.PD811 has multiple interface input ports such as Dual HDMI, Dual AV, Dual USB, VGA input interface, and RJ45 Ethernet connector for wired internet connectivity.

General Specifications:

Board Model: TP.RT2982.PD811

Supported Panels: 32-55 Inch

Supported Resolution: 1920×1080 FHD

RAM: 512 Mb DDR3

ROM: 4 GB emmc

Main Processor CPU: ARM Quad-core A7

Panel Power:  12v

Backlight: max 700 mA

Audio Power Output: 2x8w (8ohm)

System: PAL/NTSC

WIFI Antenna: Yes (Built-in)

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 110Watt

Service Mode:

Press the remote control: ” Menu 1 1 4 7 ” or ” Channel (signal source) 2580 ” a few boards as ” Menu 2580 ”

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.RT2982.PD811 Firmware for free download:

• TP-RT2982-PD811-1920×1080-Eurostar-USB.part1
• TP-RT2982-PD811-1920×1080-Eurostar-USB.part2
• TP-RT2982-PD811-1920×1080-KONKA-USB
• TP-RT2982-PD811-1920×1080-SamsungIR.part1
• TP-RT2982-PD811-1920×1080-SamsungIR.part2

TP.RT2982.PC821 Smart LED TV Board

TP.RT2982.PC821 is a network smart Android board that is designed for Asian Markets and the Middle East as well. TP_RT2982_PC821 is a full HD smart board that can support 32-46-inch LCD/LED TVs. TP-RT2982-PC821 is a new Android single-chip solution from Realtek. This is a three-in-one triple play board with a main Quad-core A7 CPU,3DGPU, and 512MB DDR3 RAM. It can also support external expansion up to 1.5G. TP RT2982 PC821 supports external 4G EMMC.

TP.RT2982.PC821 has multiple interface input ports such as Dual HDMI, Dual AV, Dual USB, VGA input interface for PC or Laptop connectivity, and RJ45 Ethernet connector for wired internet connectivity. TP.RT2982.PC821 firmware files are shared here below in this post for the support of technicians and repairing purposes.

General Specifications:

Board Model: TP.RT2982.PC821

Supported Panels: 32-46 Inch

Supported Resolution: 1920×1080 FHD

RAM: 512 Mb DDR3

ROM: 4 GB emmc

Main Processor CPU: ARM Quad-core A7

Panel Power: 5v, 12v

Backlight: 700 mA

Audio Power Output: 2x8w (8ohm)

System: PAL/NTSC

WIFI Antenna: Yes (Built-in)

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 110Watt

Service Mode:

Press the remote control: ” Menu 1 1 4 7 ” or ” Channel (signal source) 2580 ” a few boards as ” Menu 2580 ”

Caution: 

All the pictures and specification details related to TP.RT2982.PC821 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given TP.RT2982.PC821 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given TP.RT2982.PC821 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

TP.RT2982.PC821 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

TP.RT2982.PC821 EMMC Backup:

This board has a 4GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard TP.RT2982.PC821 and written by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

TP.RT2982.PC821 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.RT2982.PC821 Firmware for free download: