TP.V56.PB725 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB725 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 32 to 43-inch screens up to a resolution of 1920×1080. Its USB interface can support software upgrades and multimedia playback as well.
It is intended to be used with LED panel covers and full HD TVs. This board will benefit the demands of the Asia-Pacific and Middle East regions. The Quintet board serves three purposes in one. This motherboard integrates an ATV card, a backlight inverter circuit module, and a main power module. According to the latest customer situation, this board is equipped with all initial and empty anchors, such as HDMI input, USB interface, PC input, corridor information, TV, Scart, etc. Multimedia file playback and software/firmware updates are supported by the USB trading point.
General Specifications:
Brand/Mark: China Universal
Model: TP.V56.PB725
Main Chipset: TSUMV56RUU-Z1
Tuner Chip: R842
Product: LED TV Driver Board
Resolution: Up to 1920×1080
Panel: 32″ to 43″
Panel voltage: 12V
Backlight Adjust: Yes
Mirror Mode: Yes
Input Supply: 220V AC
Backlight: w
Speaker Output: 2x5W
Service Mode:
Source/Input 2580
Note:
All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
TP.V56.PB842 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB842 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 28 to 39-inch screens up to a resolution of 1920×1080. Its USB interface can support software upgrades and multimedia playback as well. TP.V56.PB842 firmware files are given below for technician support.
It’s designed to be used with Full HD television and LED panel cover. The demand in the Middle East and the Asia Pacific region can profit from this board. The quintet board has 3 functions in 1. The main power module, backlight inverter circuit module, and ATV card are integrated into this motherboard. This board has all introductory and empty anchorages according to the rearmost client conditions, similar as HDMI input, USB interface, PC input, corridor information, television, Scart, etc. The USB trading point can be used for software/ firmware updates and multimedia file playback.
General Specifications:
Brand/Mark: China Universal
Model: TP.V56.PB842
Main Chipset: TSUMV56RUU-Z1
Tuner Chip: R842
Product: LED TV Driver Board
Resolution: Up to 1920×1080
Panel: 28″ to 39″
Panel voltage: 12V
Backlight Adjust: Yes
Mirror Mode: Yes
Input Supply: 220V AC
Backlight: 600mA 75w
Speaker Output: 2x5W
Service Mode:
Source/Input 2580
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.V56.PB842 Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
The TP.V56.PB759 LCD/LED TV-specific ATV driver motherboard is simple. It is designed to be used with full HD LCD and LED screens. The Middle East and Asia Pacific markets can benefit from this board. The combo board has three functions in one. The primary power supply module, backlight inverter circuit module, and ATV card are integrated into this motherboard. This board has all the components and connectivity options as per the latest customer requirements like HDMI input, USB interface, PC input, Parts information, TV, Scart, etc. The ATV driver motherboard TP.V56.PB759 dedicated to TV/LED TV is easy.
It is designed to be used with Full HD TV and LED panel cover. The demand in the Middle East and the Asia Pacific region can benefit from this board. The combo board has 3 functions in 1. The main power module, backlight inverter circuit module, and ATV card are integrated into this motherboard. This board has all basic and empty ports according to the latest customer requirements, such as HDMI input, USB interface, PC input, parts information, TV, Scart, etc. The USB trading point can be used for software/firmware updates and multimedia file playback.
It also supports headphone output. To assist experts, the firmware file TP.V56.PB759 is listed below. The USB port can be used for software/firmware updates and playing multimedia files. It also supports headphone output. With the help of experts, the TP.V56.PB759 firmware files are listed below.
Basic Info:
Model No. TP.V56.PB759 (Combo Board)
Main Chipset: TSUMV56RUU
LED Backlight: 220mA to 280mA
Display Format: up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
Panel Screen Support: 20″ to 32″
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single-channel or Dual-channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: AC 220V
Maximum Current: 3000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Firmware Type: USB Upgrade and Backup Dump
Firmware Name: VST56_4MB_55.bin
How to Upgrade Firmware:
Step 1: Empty the U disk
Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.
Step 3: Connect the U disk with the Mainboard
Step 4: Connect the Keypad and IR also
Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,
Factory Service Mode:
Menu+1147
Note: The following is given TP.V56.PB759 firmware is a dump backup and USB upgrade. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.V56.PB759 Firmware Files:
Download the following given TP.V56.PB759 firmware and then extract you will get the folder. Now load the file by a programmer. For More Details about the download, process watch the video Click Here
TP.V56.PC821 is designed for an LCD/LED FHD TV Board that supports a screen size of 42″ to 55″. TP_V56_PC821 is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard that is also called a combo board. TP-V56-PC821 is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 40 pins LVDS Connector screen cable and has 4Mb program storage memory. TP.V56.PC821 firmware files are given below for the Technician’s support.
General Specifications:
Brand/Mark: China Universal FHD Three-in-One Board
Model: TP.V56.PC821
Product: LED TV
LED Backlight Current: 550mA
Main Chipset: TSUMV56
Flash IC: 4Mb
Screen supported: 42-55 inch
Resolution: Up to 1920×1080
Panel Voltage: 12V
Power Input: 220V AC
Firmware Name: VST56_4MB_42.bin
Firmware Type: USB Upgrade and Backup Dump
Service Code:
Menu+1147
Note: The following software/firmware is USB upgradeable and backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.V56.PC821 Firmware File:
Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
How to Program:
Format the USB Disk with FAT32 System
Transfer the required resolution file into a USB
Insert the USB into the TV Motherboard USB interface
Connect the Keyboard&IR
Power on the Main Board and wait until the LED light Start Flashing
Keep watching while the LED light stops flashing. It is Done
TP.V56.PC815 is designed for an LCD/LED FHD TV Board that supports the screen size of 26″ to 42″. TP_V56_PC815 is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard that is also called a combo board. TP-V56-PC815 is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 40 pins LVDS Connector screen cable and has 4Mb program storage memory. TP.V56.PC815 firmware files are given below for the Technician’s support.
General Specifications:
Brand/Mark: China Universal FHD Three-in-One Board
Note: The following software/firmware is USB upgradeable and backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.V56.PC815 Firmware File:
Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
How to Program:
Format the USB Disk with FAT32 System
Transfer the required resolution file into a USB
Insert the USB into the TV Motherboard USB interface
Connect the Keyboard&IR
Power on the Main Board and wait until the LED light Start Flashing
Keep watching while the LED light stops flashing. It is Done
