Tag Archives: TP.VST59S.PB778 Backup

TP.VST59S.PB778 MV59PV Software Free Download

TP.VST59S.PB778 LED TV Board

TP.VST59S.PB778 MV59PV is a simple ATV Driver Motherboard intended for LCD/LED TVs. This board is suitable for HD and Full HD LED TV Screen Panels. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart(optional).

Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. TP-VST59S-PB778-MV59PV is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can support 32 to 39-inch HD and FHD panel screens. The main processor is made by Mstar and its graphics are also good. TP. VST59S.PB778 MV59PV firmware files are given below for the technician’s support.

Tp.vst59S.pb778

General Features and Technical Specifications:

Brand/Mark: Universal Board

Model: TP. VST59S.PB778 MV59PV

Main Chip: TSUMV59

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: R840

HDMI Inputs: 02

USB Input: 02

RCA Inputs: 02

PC Input: VGA Interface

Coaxial Input: Yes

Headphones Out: Yes

Screen supported: 32inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: bin_v59s.bin

Firmware Type: USB Bootable and Backup Dump

Service Menu Code:

Source/Input 2580 OR Menu 1147 For More Service Menu Codes visit Here.

How To Install USB Firmware:

  1. Download the given file USB bootable (bin_v59s.bin)
  2. Transfer the File into Pen Drive (FAT32 Formated)
  3. Switch OFF the LED TV from Mains
  4. Insert USB Disk into LED TV
  5. Power On the LED TV
  6. It will boot automatically. wait until it’s done.

Tp.vst59S.pb778-Voltage-Chart

How to Load Backup Dump:

  1. Download the given backup dump file (.Bin)
  2. Save it on a Hard Disk or transfer it to Pen Drive
  3. Connect the VGA Interface with the programmer and transfer the bin file. If not succeed with VGA then
  4. Remove the Flash IC from the Board or Use a Clip adapter
  5. First of All, Save the Old backup of SPI Flash
  6. Write the SPI Flash Memory with Bin file
  7. Resold it back. Done.

TP.VST59S.PB778 MV59PV firmware for free download:

Download Button Kazmi Elecom

error: Content is protected !!