Tag Archives: TSUMV59XU-Z1

ST239-F23C LED TV Board

ST239-F23C is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F23C firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F23C

Main Chip: TSUMV29LU/TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 2Mb

Sound Chip: 1517p

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F23C firmware for free download:

• ST239-F23C 1366×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP6 LED TV Board

ST239-FP6 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP6 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP6

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: 85v 300mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP6 firmware for free download:

• ST239.FP6 SG-3S3205D-INVERTED-DUMP
• ST239.FP6 SG-3S3205D-NORMAL-DUMP
• ST239.FP6 UNICOM 32D01-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP10 LED TV Board

ST239-FP10 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP10 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP10

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP10 firmware for free download:

• ST239.FP10 1366×768-LG-DUMP
• ST239.FP10 1366X768-MIRROR-DUMP
• ST239.FP10 JINZHENG-32-DUMP
• ST239.FP10 SOKKIA-32-DUMP
• ST239.FP10 TCL-32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F20G Universal Board

ST239-F20G is a multi-purpose LCD controller board, it is suitable Asia market, and it is designed to support a FULL HD LCD panel. ST239 F20G can support PC-RGB, HDMI/S-Video (option), AV/YPBPR (Option), USB, VGA, and TV signal input. It can also support Earphone output.

Basic Info:

Model No. ST239-F20G

Main Chipset: TSUMV59XU-Z1

Trademark: Universal

Display Format: up to 1920×1080

SPI Memory: 4MB

Sound IC: 1517P

Bin Name: MERGE59.bin

Firmware Type: USB Bootable

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (MERGE59.bin) to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu 1147, Input+2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ST239-F20G Firmware Free Download Here :

• ST239.F20G-V59-1280×1024-USB
• ST239.F20G-V59-1366×768-USB
• ST239.F20G-V59-1440×900-USB
• ST239.F20G-V59-1600×900-USB
• ST239.F20G-V59-1680×1050-USB
• ST239.F20G-V59-1920×1080-USB
• ST239.F20G-V59-1920×1200-USB
• ST239.F20G-V59-ALL-RESOLUTIONS

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TSUX9V5.1-C LCD Driver Board

TSUX9V5.1-C is a multi-purpose LCD controller board, it is suitable Asia market, and it is designed to support a FULL HD LCD panel. TSUX9 V5.1-C can support PC-RGB, HDMI/S-Video (option), AV/YPBPR (Option), USB, VGA, and TV signal input. It can also support Earphone output.

Basic Info:

Model No. TSUX9V5.1-C

Main Chipset: TSUMV59

Trademark: TOP-TECH

Display Format: up to 1920×1080

SPI Memory: 4MB

Sound IC: 1517P

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TSUX9V5.1-C Firmware Free Download Here :

• TSUX9V5.1_C V59 1024×768-USB
• TSUX9V5.1_C V59 1280×1024-USB
• TSUX9V5.1_C V59 1366×768-USB
• TSUX9V5.1_C V59 1440×900-USB
• TSUX9V5.1_C V59 1600×900-USB
• TSUX9V5.1_C V59 1920×1080-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.VST59.P8B

TP.VST59.P8B is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. TP_VST59_P8B is a combo board which means the main power supply, ATV board, and LED backlight driver board is a built-in single PCB. This board has all the connectivity ports like HDMI, AV RF Tuner, and USB but the VGA connectivity interface is not available in this board. USB ports can be used for updating software as well as for multimedia playback. TP-VST59-P8B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.PA502

Main Chip: TSUMV59XU-Z1

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 220V AC

MAX Backlight Watt: 40.5W

Backlight voltage:

Resolution: up to 1920×1080

Flash size: 4 MB

Service Menu:

Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.VST59.P8B firmware for free download:

• TP-VST59-P8B 1366x768_AMOI_DUMP
• TP-VST59-P8B 1366x768_BERG_DUMP
• TP-VST59-P8B 1366x768_FUJI_DUMP
• TP-VST59-P8B 1366x768_FUSION_DUMP
• TP-VST59-P8B 1366x768_G-GUARD_DUMP
• TP-VST59-P8B 1366x768_HAAS_DUMP
• TP-VST59-P8B 1366x768_HPP_DUMP
• TP-VST59-P8B 1366x768_KONKA_DUMP
• TP-VST59-P8B 1366x768_THOMSON_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV59L-G LED TV Board

CV59L-G is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_G board is suitable for the Asia Pacific and the Middle East markets.CV59L.G is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. CV59L G has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-G firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV59L_G

Main Chip: TSUMV59XE/TSUMV59XU-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV59L-G firmware for free download:

CV59L-C LED TV Board

CV59L-C is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_C board is suitable for the Asia Pacific and the Middle East markets.CV59L.C is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. CV59L C has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-C firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV59L_C

Main Chip: TSUMV59XE-Z1/TSUMV59XU-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip: 1517P

Tuner IC: 5158

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV59L-C firmware for free download:

CV59H-BPW LED TV Board

CV59H-BPW is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is not a Combo Board the main power module and LED Backlight Inverter module is required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-BPW software files are given for the technician’s support.

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H- DPW

Main Chip: TSUMV59XUS-Z1

Product: LED TV

LED Backlight: NA

Flash IC: 4Mb

Screen supported: 32-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-DPW firmware for free download:

GSL-V59XU-Z1 Universal Board

Basic Info:

Model No. GSL-V59XU-Z1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

GSL-V59XU-Z1 Firmware All resolutions Free Download Here :

• GSL.V59XU.Z1-800×600-Firmware-USB
• GSL.V59XU.Z1-1024×600-Firmware-USB
• GSL.V59XU.Z1-1024×768-Firmware-USB
• GSL.V59XU.Z1-1152×768-Firmware-USB
• GSL.V59XU.Z1-1280×720-Firmware-USB
• GSL.V59XU.Z1-1280×768-Firmware-USB
• GSL.V59XU.Z1-1280×800-Firmware-USB
• GSL.V59XU.Z1-1280×854-Firmware-USB
• GSL.V59XU.Z1-1280×960-Firmware-USB
• GSL.V59XU.Z1-1280×1024-Firmware-USB
• GSL.V59XU.Z1-1366×768-Firmware-USB
• GSL.V59XU.Z1-1400×1050-Firmware-USB
• GSL.V59XU.Z1-1440×900-Firmware-USB
• GSL.V59XU.Z1-1600×900-Firmware-USB
• GSL.V59XU.Z1-1680×945-Firmware-USB
• GSL.V59XU.Z1-1680×1050-Firmware-USB
• GSL.V59XU.Z1-1920×1080-Firmware-USB
• GSL.V59XU.Z1-1920×1200-Firmware-USB