Tag Archives: universal board

New Universal LCD/LED Controller Board

Basic Info:

Model No. T.R83.03 V3

Main Chipset: RDA 8503C

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware T.R.83.03 Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB Bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.R83.03 Firmware:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

T.R83.03 Firmware All resolutions Free Download Here :

RR83.03D Universal Driver Board

RR83.03D is an analog LCD/LED a multi-purpose and energy-efficient driver Controller Board that is suitable with most types of panels but not all. This board is designed for especially the Asia Pacific and the Middle East. RR83 03D can support the Russian language also. RR83-03D supports high screen 1920×1080, 7-55 inch LVDS screens. Not only USB interface can be used to play Video/music/photo formats are supported but it is not supported AC3 Audio, you can also display a boot photo or LOGO as well and can upgrade/install software with it.

RR83.03D board has all the necessary connectivity interfaces for the user’s convenience. It has HDMI input for connecting Digital High Definition devices, USB input for software upgrades and multimedia playback, Composite input for connecting analog devices, VGA interface for computer and laptop, and headphones out 3.5mm jack.

General Specifications:

Model: RR83.03D

Main Chipset: RDA8503C

OSD Language: Russian, English, Chinese, French, German, Italian, Burmese

Panel Size: 7-55 inch LVDS screen

Max Resolution: 1920*1080

Input Interface: PC / HDMI / TV / USB multimedia playing

Panel Power Voltage: 3.3V,5V,12V

Interface: Single/Dual LVDS(6/8bit)

Max Audio Output Power: 2x3W(4Ω)

EARPHONE: 2*10mW(32ohm)(max)

FR input: ATV Receiving

Video System: PAL, SECAM, NTSC

Power Input: DC 12V 3-5A, 4A is the best

Standby Power Consumption: <0.5W(board only)

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts and then extract any one of them you will get the folder. For More Details about the download process, watch the video Click Here

RR83.03D Firmware for Free Download:

• RR83.03D-RR8503-All-Resolution-USB.part1
• RR83.03D-RR8503-All-Resolution-USB.part2

TP.VST59.P83 LED TV Board

TP.VST59.P83 is a universal led tv combo controller board that is suitable for 32-inch panels and others. TP_VST59_P83 is three in one board that is backlight inverter, main power supply, and logic board are builtin into a single PCB which is why it is called a combo board. TP-VST59-P83 support 1920×1080 resolution. Its USB interface can be used for multimedia playback and for software updates as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.P83

Main Chipset: TSUMV59XUS-Z1

Product: LED TV

Backlight: 45 to 65v 4400mA 75w

Panel Voltage: 12v

Board Power Input: 220v AC

Resolution: Up to 1920×1080

Screen Supported: 26 to 46 inch

Service Code: Menu+1147 OR Menu+8893

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59.P83  firmware free download: