Tag Archives: V1.9.0.0 Software

VT-V59-1H-YB-1.0-CV Universal Board

VT-V59-1H-YB-1.0-CV is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support up to 24-inch LCD panels which a resolution is up to 1920×1080. It is a non-combo board which means the led backlight driver module and the main power supply module are required separately with this board. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1. VT_V59-1H-YB-1.0-CV is compatible with 15-24 inch screens. VT.V59-1H-YB-1.0-CV is widescreen-supported and also has a multi-language option. VT-V59-1H-YB-1.0-CV has its special feature of Dual AV.

General Specifications:

Model: VT-V59-1H-YB-1.0-CV

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

Factory Service Mode:

Input 2008

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following the given firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download VTX-V59-IH-YB-1.1 Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

VT-V59-1H-YB-1.0-CV Firmware Collection Free Download:

• VT_V59-1H-YB-1.0-CV_1366x768_BESTON
• VT_V59-1H-YB-1.0-CV_1366x768_VIDEOTEX
• VT_V59-1H-YB-1.0-CV_1600x900_BESTON
• VT_V59-1H-YB-1.0-CV_1600x900_OSCAR

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HP-V59-V1.1 Universal Board

Basic Info:

Model No. HP-V59-V1.1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade HP-V59-V1.1 Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (MERGE.Bin) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

(Note: *During Step 5, the power supply can’t be cut off *The same firmware can only be burned once time)

Factory Service Mode:

Menu+1147

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts and then extract any one of them you will get the folder. For More Details about the download process, watch the video Click Here

HP-V59-V1.1 Firmware All resolutions Free Download Here :

• HP.V59-V1.1-800×600-Firmware-USB
• HP.V59-V1.1-1024×768-Firmware-USB
• HP.V59-V1.1-1152×768-Firmware-USB
• HP.V59-V1.1-1280×768-Firmware-USB
• HP.V59-V1.1-1280×800-Firmware-USB
• HP.V59-V1.1-1280×960-Firmware-USB
• HP.V59-V1.1-1280×1024-Firmware-USB
• HP.V59-V1.1-1366×768-Firmware-USB
• HP.V59-V1.1-1400×1050-Firmware-USB
• HP.V59-V1.1-1440×900-Firmware-USB
• HP.V59-V1.1-1600×1200-Firmware-USB
• HP.V59-V1.1-1680×1050-Firmware-USB
• HP.V59-V1.1-1920×1080-Firmware-USB
• HP.V59-V1.1-1920×1200-Firmware-USB

V.TV9G02 Universal LED TV Board

V.TV9G02 is a universal TV control board designed for Asia‐Pacific and Middle-East markets. V_TV9G_02 board has excellent and mature performance. V-TV9G-02 can support LCD and LED panels, and the maximum resolution supported is 1920×1080 Full HD. LA MV56U A can drive an LCD or LED panel smaller than 26 inches to get a cost‐effective and high-performance and popular flat-panel analog TV set.

Basic Info:

Model No. V.TV9G02

Main Chipset: TSUMV59XC

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required bin file in the FAT32 USB Disk
2. Connect the U disk to the Mainboard
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

V.TV9G02 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.