Tag Archives: V56 DRIVER

Z.VST.V56RJ.B & Z.VST.V56RU.B Universal LED TV Board

Z.VST.V56RJ.B & Z.VST.V56RU.B is a universal LCD/LED TV Controller Driver Board with the main chipset of V56. V56 chip is a chip upgrade based on V59. The following two board models of the V56 chipset are:

• Z.VST.V56RJ.B
• Z.VST.V56RU.B

Z.VST.V56RJ.B & Z.VST.V56RU.B is a complete LCD TV, driver board, and motherboard that has a USB VGA HD AV TV on the driver board. It supports high screen resolution 1920×1080 with screen sizes of 15-42 inch LVDS screen. About its USB interface, the Not only USB interface can be used to upgrade programs, but also can use to play video, basically, formats are supported. You can also set a boot display pictures or LOGO.

General Specifications:

Model: LLV56

Board Number: Z.VST.V56RU.B & Z.VST.V56RJ.B

Scheme of the chip: TSUMV56

Input Interface: PC / HD / TV / USB multimedia playing

Voltage Input: Single 12V, 4Amp

Screen interface: LVDS Single 6 / 8 , Double 6 / 8

Screen voltage: 3.3V / 5V / 12V

Resolution: Support high screen 1920 * 1080, 15-42 inch LVDS screen

How to Program:

1. The screen of the program is copied to the USB drive.
2. Insert USB Flash disk to the USB port on the motherboard
3. Connect the keypad, electricity, until you see by the indicator lights on the keypad after flashing in red and green, until after the indicator light flashing, unplug the power, then pull out USB Flash disk, afresh power on.

(Note that write programs do not power outages, crashing won’t be able to use)

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below the Z.VST.V56RJ.B & Z.VST.V56RU.B firmware USB updateable files for free download:

T.V56.031 Universal TV Board

T.V56.031 is a universal LCD/LED TV Controller board that is designed for Asian countries and supports the Russian menu language as well. T_V_56_031 supports a high screen resolution of 1920×1080 panels. T.V56.031 is compatible with 7-55″ LVDS screens but does not support all panels.

Basic Info:

Model No. T.V56.031

Main Chipset: TSUMV56RUU-Z1

Support Language: Russian, English, Chinese, French, Vietnamese

Display Format: 720p

Max Resolution : up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Mirror Enable: Yes

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software (“VST56_4MB.bin”) in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flash rapidly
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
5. It continues to keeps flashing and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn on also remove the u-disk

Factory Service Mode:

Input 2580

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

T.V56.031 Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.