Tag Archives: V59 031 Software

SP-V59-GH V59 Universal Board

Basic Info:

Model No. SP-V59-GH-1.0, SP-V59-GH-1.1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

Backlight: Yes

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more details about the download, process watch the video Click Here

SP-V59-GH Firmware Free Download Here :

• SP.V59.GH-1.0_1366x768_Backup_Dump
• SP.V59.GH-1.1_1920x1080_Backup_Dump
• SP.V59.GH-1.1_1600x900_Backup_Dump

V59-T9C1 LED TV Driver Board

V59-T9C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T9C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C1 is compatible with Non-HD and FHD LCD/LED panel screens. V59.T9C1 is widescreen-supported and also has a multi-language option. V59 T9C1 has its special feature of Dual AV extendable.V59-T9C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: V59-T9C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following the V59.T9C1 firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download V59-T9C1 Firmware File:

Download your required file of the following V59.T9C1 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

V59-T9C1 Firmware Collection Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

GSL-V59XU-Z1 Universal Board

Basic Info:

Model No. GSL-V59XU-Z1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

GSL-V59XU-Z1 Firmware All resolutions Free Download Here :

• GSL.V59XU.Z1-800×600-Firmware-USB
• GSL.V59XU.Z1-1024×600-Firmware-USB
• GSL.V59XU.Z1-1024×768-Firmware-USB
• GSL.V59XU.Z1-1152×768-Firmware-USB
• GSL.V59XU.Z1-1280×720-Firmware-USB
• GSL.V59XU.Z1-1280×768-Firmware-USB
• GSL.V59XU.Z1-1280×800-Firmware-USB
• GSL.V59XU.Z1-1280×854-Firmware-USB
• GSL.V59XU.Z1-1280×960-Firmware-USB
• GSL.V59XU.Z1-1280×1024-Firmware-USB
• GSL.V59XU.Z1-1366×768-Firmware-USB
• GSL.V59XU.Z1-1400×1050-Firmware-USB
• GSL.V59XU.Z1-1440×900-Firmware-USB
• GSL.V59XU.Z1-1600×900-Firmware-USB
• GSL.V59XU.Z1-1680×945-Firmware-USB
• GSL.V59XU.Z1-1680×1050-Firmware-USB
• GSL.V59XU.Z1-1920×1080-Firmware-USB
• GSL.V59XU.Z1-1920×1200-Firmware-USB

HP-V59-V1.1 Universal Board

Basic Info:

Model No. HP-V59-V1.1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade HP-V59-V1.1 Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (MERGE.Bin) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

(Note: *During Step 5, the power supply can’t be cut off *The same firmware can only be burned once time)

Factory Service Mode:

Menu+1147

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts and then extract any one of them you will get the folder. For More Details about the download process, watch the video Click Here

HP-V59-V1.1 Firmware All resolutions Free Download Here :

• HP.V59-V1.1-800×600-Firmware-USB
• HP.V59-V1.1-1024×768-Firmware-USB
• HP.V59-V1.1-1152×768-Firmware-USB
• HP.V59-V1.1-1280×768-Firmware-USB
• HP.V59-V1.1-1280×800-Firmware-USB
• HP.V59-V1.1-1280×960-Firmware-USB
• HP.V59-V1.1-1280×1024-Firmware-USB
• HP.V59-V1.1-1366×768-Firmware-USB
• HP.V59-V1.1-1400×1050-Firmware-USB
• HP.V59-V1.1-1440×900-Firmware-USB
• HP.V59-V1.1-1600×1200-Firmware-USB
• HP.V59-V1.1-1680×1050-Firmware-USB
• HP.V59-V1.1-1920×1080-Firmware-USB
• HP.V59-V1.1-1920×1200-Firmware-USB