Tag Archives: VS.T53U12.2 Service Code

VS.T53U12.2 Universal Board

Basic Info:

Model No. VS.T53U12.2

Main Chipset: TSUMV53RUUL-Z1

Tuner: R842

Display Format: up to 1920×1200

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait until even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Source+308

Note: Following VS.T53U12.2 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download VS.T53U12.2 Firmware File:

Download all parts of the following VS.T53U12.2 firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

VS.T53U12.2 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

M53V5.1 Universal TV Board

M53V5.1 is an analog universal LCD/LED TV Controller Driver Board. It can support Multi-Language with Russian also. M53V5.1 can support Full HD 1920×1080 resolution panels with a screen size of 8 inches to 42 inches. Its USB interface can be used to upgrade programs as well as can be used to play Video /music/photos Basically all formats are supported.

You can also set boot display images or LOGO and the Mirror option is also available on this board. Its inbuild software can support multiple screen resolutions with remote coding, So there, No need to load software in it.

Basic Info:

Model No. M53V5.1

Main Chipset: TSUMV53RUUL-Z1

Tuner: RDA5160

Display Format: up to 1920×1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Single 6/8, Double 6/8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Russian, English, Simplified Chinese, French, German, Italian, Spanish. Deutsch, Arabic

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Panel Voltage: 3.3V/5V/12V DC (jumping setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Backlight Option: Yes

Mirror Option: Yes

Capture Logo: Yes

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3.5 Amp

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Insert the firmware into a formatted USB flash disk (FAT32).
2. Insert the USB disk and Connect the 7KEY-Button to the board
3. After turning on the power, then the 7key button light will be red flash red faster.
4. LED CONTINUES TO BLINK AND NEVER STOP. is normal, just wait about 1 minute, and that means the update has been completed. Then unplug and remove the u-disk.
5. Note: that the writing program does not lack power, crashing will not able to use

Factory Service Mode:

Input 2580

Note: The following firmware collection is a USB boot file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more details about the download, process watch the video Click Here

M53V5.1 Firmware All resolutions Free Download Here :

S368A1.5 New Software Update Multi-Resolution & Multi Remote Control