Tag Archives: Zp.Vst.V56Ru.P813 Software Free Download

ZP.VST.V56RU.P813 LED TV Board

ZP.VST.V56RU.P813 is an analog LCD/LED TV Motherboard that is suitable for the Asia Pacific and the Middle East countries. ZP_VST_V56RU_P813 is a triple board which is a backlight driver inverter, power supply unit, and ATV module built into a single printed circuit board. Its USB interface/port can be used for multimedia playback and for updating programs as well. It has all the connectivity interfaces as per user requirements like HDMI, AV, VGA, RF, USB, Headphones, etc. ZP-VST-V56RU-P813 firmware files are shared in this post for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: ZP.VST.V56RU.P813

Main Chipset: V56

Product: LED TV

Resolution: Up to 1920×1080

Backlight: 70v / 466mA , 90v / 500mA

Flash Size: 4Mb

Service Code: Menu+1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ZP.VST.V56RU.P813 firmware for free download:

• ZP-VST-V56RU-P813_1366x768_Samsung_Dump
• ZP-VST-V56RU-P813_1366x768_Sony_Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZP.VST.V59.P671 Universal Board

Basic Info:

Model No. ZP.VST.V59.P671 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 18V to 70V 220mA to 300mA

Display Format: up to 1920×1080

Panel Supported: 15″ t0 29″ Screens

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB upgradeable dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download ZP.VST.V59.P671 Firmware:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

ZP.VST.V59.P671 Firmware files Free Download:

• ZP.VST.V59.P671_NOBEL_24 Inch
• ZP.VST.V59.P671_1366x768_Backup
• ZP.VST.V59.P671_1366x768_USB
• ZP.VST.V59.P671_SONY_24 Inch