TPD.NT72563.PB771 Software Free Download

TPD.NT72563.PB771 Smart Android Board

TPD.NT72563.PB771 is a smart Android LED TV board. Its maximum supported screen resolution is 1920×1080 Full HD 1080P. It features several input-output user connectivity interfaces, including a 3.5 mm headphone output jack to amplify the audio output. For connecting Analog devices, it has an RCA (Component) input interface. For connecting digital Full HD devices, it has three HDMI ports by which users can connect several full HD devices such as Blu-ray players, Playstations, Gaming consoles, Media Players, etc. It has a dual USB input interface for connecting hard disk drives and other USB devices, and for upgrading software purposes.

Download Here

TPD.NT72563.PB771 is a three-in-one Android smart LED TV motherboard. It is also called a Combo network LCD LED TV driver board. It is built with three major parts on a single PCB: the cable TV tuner, the LED backlight inverter driver controller circuit module, and the main power input supply module. This board has a 48-pin LVDS connector interface for LCD LED TV Screen Panels. It has 4 GB of storage memory capacity. The main processor is a quad-core made by Novatek (NT72563MBG-TL). The graphics and sound quality of this board are excellent.

TPD.NT72563.PB772 General Information:

Board Model: TPD.NT72563.PB771

Main Chipset: NOVATEK NT72563MBG-TU

CPU: Quad-Core ARM Cortex-A53

GPU: Dual-Core G52MP2

Android Version:

Resolution: 1920×1080

Audio Power: 2x8W (16 watt 8 ohm)

Backlight Current: NA

Backlight Power: NA

USB Ports: 2

HDMI Ports: 3

CI: No

Component: Yes

RJ45: Yes

Analog Tuner: PAL/SECAM/NTSC (AV) BG/DK/I/LL

Digital Tuner: DVB-T2/C/S2

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 4GB DRAM

Storage (ROM): 4 GB EMMC Flash

Power Rating: 220V~240V 50Hz

Power Consumption: 75Watt

Firmware Name: Update.img

Firmware Type: EMMC Backup Dump

Product User: TCL

How to Write TPD.NT72563.PB771 EMMC Backup:

Download the given TPD.NT72563.PB771 EMMC backup shared in this post below
Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
JTAG the mainboard with the Programming Tool
Write the EMMC data
Done.

Note: The following TPD-NT72563-PB771 firmware is a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.