DEXP U65E9000K UHD Smart LED TV
DEXP U65E9000K is a 65-inch smart UHD LED TV. It has supported an FHD resolution of 3840×2160, and a Refresh Rate is 60 hertz. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming consoles, and also has more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support, 20 Watts sound output, and HDR Display viewing.
DEXP U65E9000K can support Smart TV with Android version 11.0. Its motherboard is built with 1GB of RAM and 8 GB of ROM storage memory. DEXP U65E9000K firmware files are given below for free download to support technicians.
Specifications & Features:
Brand/Mark: DEXP
Model: U65E9000K
Main Board Model: P150-2851V6.3
Main Chipset: RTD2851
Panel: LSC650FN04-3
Interface: Single/Dual LVDS
Tuner: ATV & DTV
Operating System: Android
CPU: Cortex A53 Quad-Core
CPU Frequency: GHz
GPU: Multi-core
GPU Frequency: MHz
Ram: 1.5 Gb
Rom: 8 Gb eMMC
Backlight Output Voltage Range: 65V-135V
Backlight output channel: 2 (3pin-PH2.0 )
Backlight current: 300mA*2
Backlight output power: 108W
Audio Output: 2x8w
Resolution: up to 3840×2160
Panel Power: 12V
Power Input: 100-240V AC 138W
Firmware File: RTK2851P.IMG
Firmware Type: USB Upgradeable
Service Menu: MENU – SOUND – 2008
Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new to loading, installing, or updating software, firmware, or dump files, or are experiencing issues during firmware installation, please visit and read this information first.
DEXP U65E9000K Firmware for free download:
