HAIER LE32A900G Smart LED TV
Haier LE32A900G is a 32-inch HD Ready smart LED TV with a resolution of 1366×768. LE32A900G is an Android TV. LE32A900G LED TV has all the latest features and connectivity ports, such as an HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09, and its dynamic ratio is 150000:1.
Its view angle is horizontal: 176 degrees and vertical: 176 degrees. Haier LE32A900G has additional edge-led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 220 cd/m2, and response time is 7 ms. The Haier firmware file is given below for the technician’s support. For more Haier software collection, visit here.
A7K59T1 General Information:
Model: LE32A900G
Mainboard: A7K59T1 LA.017.22102050.0003 VER00.04
Main Chipset: MEDIATEK MT9216HAATFB
CPU: Quad-Core
GPU: Dual-Core
Smart platform: Android 8, 9 with Full voice control
Resolution: 1920×1080
Audio Power: 2x6W (12 watts)
Backlight Current: 380-620 mA
Backlight Voltage Range: 40-114 Volt
USB Ports: 2
HDMI Ports: 3
CI: No
Component: Yes
RJ45: Yes
Analog Tuner: PAL, SECAM, NTSC
Digital Tuner: DVB-T / T2, DVB-C
Wifi: Yes
Mira-Cast:
Memory (RAM): 1.5GB DRAM
Storage (ROM): 8 GB EMMC Flash
Power Rating: 110V~240V 50/60Hz
Power Consumption: 65Watt
Firmware Name: upgrade_imge_no_tcertificate_tvconfig_project_id.pkg
Firmware Type: USB Bootable
Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.
HAIER LE32A900G Firmware files for free download:
