Tag Archives: Haier LE65U6500U Service Manual

Haier LE65U6500U Software Free Download

Haier LE65U6500U 4K UHD Smart LED TV

Haier LE65U6500U LED TV is a UHD Smart 4K with a supported screen resolution of 3840×2160. Its picture quality is very clear and smooth. It brings you into an intelligent world with a Linux operating system and WIFI connectivity. You can also view and enjoy your mobile content on your LED TV Big Screen. It improves efficiency With the WIFI function, multi-screen sharing and controlling via TV, Computer, and smartphone are so easy.

Haier LE65U6500U LED TV has all the latest requirement connectivity ports for the best user experience. Its HDMI Interface allows you to connect your entertainment gadgets to LED TV and conveniently switch to each device & have an enjoyable multimedia experience. Multimedia programs are easy to watch by their USB interface. The Haier LE65U6500U LED TV Software file is shared in this post for the support of technicians to get it recovered in case of software malfunctions.

Haier Le65U6500U

General Specifications:

Make/Model: Haier LE65U6500U

Chassis: MSD64882

Display Size: 65″ (165cm)
Screen Resolution: 4K Resolution, 3840 x 2160 pixels
Refresh Rate: 60 Hz
Aspect Ratio 16:09
Noise Reduction: Yes
Comb Filter: Yes
Total Speaker Output: 20w (8W*2)
Automatic Volume Control: Yes
Headphone Output: Yes
Smart TV: Yes (Linux)
Wi-Fi: Yes
USB Ports: 3
HDMI Ports: 3
Ethernet/LAN Port: Yes
Voltage Requirement AC 100 – 240
Power Consumption: 108 watt
Power Consumption (Stand-by): 0.5 watt

Caution: 

All the pictures and specification details related to Haier LE65U6500U in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given Haier LE65U6500U USB software or backup dump file. A few benefits are described below:

  • The dead board can be recovered and operational by loading the given software backup file
  • The Original Remote and Logo as per the model specifications
  • Money saving instead of changing the mainboard
  • Time-saving instead of arranging a new board
  • Customer satisfaction to do an urgent job
  • Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given Haier LE65U6500U USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

  • The working board may go to the standby position
  • Version change may cause trouble
  • Panel screen parameters may be changed

Haier LE65U6500U Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

Haier Le65U6500U Board Jpg

Haier LE65U6500U Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

Haier LE65U6500U firmware for free download:

Kazmi-Elecom

error: Content is protected !!