STRONG 32HB4003 is a 32 inches HD Ready LED TV with a resolution of 1366×768. 32HB4003 is a non-smart tv. 32HB4003 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.
Its view angle is STRONGal: 170 degrees and vertical: 160 degrees. 32HB4003 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. STRONG Software file is given below for the technician’s support. For more STRONG Software collection visit here.
General Specifications & Features:
Make: STRONG
Model: 32HB4003
Display Size: 32″
Storage Memory: MB
HD Technology: HD
Panel: HD
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: W, 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
STRONG SRT-32HZ4003N is a 32 inches HD Ready LED TV with a resolution of 1366×768. SRT-32HZ4003N is a non-smart tv. SRT-32HZ4003N led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.
Its view angle is STRONGal: 170 degrees and vertical: 160 degrees. SRT-32HZ4003N has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. STRONG Software file is given below for the technician’s support. For more STRONG Software collection visit here.
General Specifications & Features:
Make: STRONG
Model: SRT-32HZ4003N
Display Size: 32″
Storage Memory: MB
HD Technology: HD
Panel: HD
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: W, 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
T.R83.819 FHD three-in-one LCD/LED TV Driver Card for LED Display Screen 32″. T_R83_819 can support up to 1920×1080 screen panel resolution. The USB interface can be used for software Upgrades and Multimedia Playback functions. T-R83-819 is specially designed for the Middle East and Asian Countries.
Basic Info:
Model No. T.R83.819 (Combo Board)
Main Chipset: RDA8503C
LED Backlight: 65W to 75W
Display Format: 1080 Full HD
Panel Supported: 32″ to 42″
Aspect Ratio: 16:9
Wide Screen: Yes
Backlight: LED
Display: TFT-LCD
PCB Size: 129.5mm(L)*146mm(W)
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single-channel or Dual-channel LVDS
USB Port: USB interface for Firmware Upgrade and Multimedia Playback Support
Note: External DC 12V Power Jack is also available on this board
Electrical Parameters:
Working Input Voltage: 100-240V AC
Maximum Current: 5000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Factory Service Mode:
Menu+1147
Flash IC: 4MB
Firmware Type: Backup Dump
Note: The following T.R83.819 firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download T.R83.819 Firmware File:
Download your required file of the following T.R83.819 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more details about the download, process watch the video Click Here
TP.MS3686.PC821 is a Dual-Core 4K non-smart LCD/LED Combo Driver Board. TP_MS3686_PC821 can support resolution up to 3840×2160 4K LCD panel@60hz. TP-MS3686-PC821 is Multi-Purpose LED 4k TV Control Board with TFT Analog and Digital TV functions. TP MS3686 PC821 has multiple input/output interface ports like WIFI, RJ45, USB 2.0, HDM 2.0, Scart, Mini AV, Mini YPBPR, and Analog TV input, also support CVBS, Optical, and earphone output. TP_MS3686_PC821 is based on the Operating System Android 4, with system machine configuration is Cortex A53 dual Core CPU and Multi-core MaliT720PM2 GPU. TP.MS3686.PC821 firmware can be updated by USB interface or SD memory.
General Specifications:
Board No: TP.MS3686.PC821
CHIPSET: MSD3686
Panel Type: TFT LCD with LED Backlight PANEL support up to HS V by one 8line @60hz
POWER To Panel: 12V
CPU: Cortex A53 Dual-Core
RAM: MB
ROM: 128 Mb Nand Flash
Resolution Format: 2160P
Backlight: 600mA
OS: NA
Network: NA
Tuner: Analog/Digital (Optional)
System update: Support USB/SD update
AC Input Requirement: 100 ~ 240V
Low power consumable mode: standby≤0.5W
Firmware Type: USB Upgrade
Firmware Name: allupgrade_3686_128MM_128MS.bin
Product User: Croatia, Starlight, Linsar
Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
Here is below TP.MS3686.PC821 firmware for free download:
PHILIPS 50PUT6800/56 is 50 inches 127 cm 6800 series Ultra HD Ultra Slim 4K Smart LED TV with a supported resolution of 3840×2160. PHILIPS_50PUT6800_56 UHD ultra Slim LED TV with the tuner (MPEG-2, MPEG-4) and Signal Strength Indicator. It has multiple input interface ports like HDMI, USB, AV, and built-in WiFi. PHILIPS-50PUT6800-56 is MPEG-2 and MPEG4 with DVBT/T2/C transmission functions. It has two built-in speakers with 20-watt powerful audio output with Auto volume Leveller.
Its firmware can be upgraded by USB interface and Multimedia playback is also available by USB. PHILIPS 50PUT6800-56 firmware files are given for the technician’s support.
General Features and Specifications:
Brand: PHILIPS
Model: 50PUT6800/56
Product: LED TV
Diagonal screen size (inch): 50 inches
Panel resolution: 3840×2160
Panel Type: IPS
Aspect ratio: 16:9
Operating System: Smart
WiFi: 2×2 Integrated
interactive TV: HbbTV
SmartTV apps:
Catch-up TV
Netflix
Spotify
Online apps
Online Video stores
Open Internet browser
YouTube
Skype
Twitter
Simply Share
Cloud TV and Cloud Explorer
Mainboard:
Processor Type: Dual-Core
Graphics Coprocessor: Mali-450 MP4
Memory: 8 GB
Tuner: DVB-T/T2/C
Video System: PAL/SECAM/NTSC
Audio Out Power: 20W (10Wx2)
Main Power Input: AC 110 – 240 V 50/60Hz
Power Consumption: W
Standby Power Consumption: < 0.3W
Firmware Type: USB Boot
Firmware Name: autorun_QM152E_000.007.070.000.upg
Product: Philips
Note: The following given 50PUT6800/56 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download 50PUT6800/56 Firmware Files:
Download your required resolution and then extract it you will get the folder. Now copy the bin file to USB. For more Details about the download process watch the video Click Here
PHILIPS 50PUT6800/56 Firmware file for free download;
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohms)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait even IR indicator led flashing in the speed
Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)
It continues to flash and never stops. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk
Factory Service Mode:
Menu+1147
Note:
If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read herefirst.
How to Download:
Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with Programmer. For More Detail about the download process, watch the video Click Here
STARWIND SW-LED24R301BT2 is a 24 inches HD Ready LED TV with a resolution of 1366×768. SW-LED24R301BT2 is a non-smart tv. SW-LED24R301BT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.
Its view angle is STARWINDal: 170 degrees and vertical: 160 degrees. SW-LED24R301BT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. STARWIND Software file is given below for the technician’s support. For more STARWIND Software collection visit here.
General Specifications & Features:
Make: STARWIND
Model: SW-LED24R301BT2
Display Size: 24″
Storage Memory: MB
HD Technology: HD
Panel: HD
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: W, 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
STARWIND SW-LED39R301BT2 is a 39 inches HD Ready LED TV with a resolution of 1366×768. SW-LED39R301BT2 is a non-smart tv. SW-LED39R301BT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.
Its view angle is STARWINDal: 170 degrees and vertical: 160 degrees. SW-LED39R301BT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. STARWIND Software file is given below for the technician’s support. For more STARWIND Software collection visit here.
General Specifications & Features:
Make: STARWIND
Model: SW-LED39R301BT2
Display Size: 39″
Storage Memory: MB
HD Technology: HD
Panel: HD
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: W, 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohms)
Screen voltage: 3.3V / 5V / 12V (Jump cap)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 3-5 Amp
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Not only USB interface can be used to upgrade programs, but also can be used to play video/music/photos, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.
How to Upgrade T.SK106A.03 Program:
Copy the Required bin file in the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of LCD/LED TV
Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
Menu+1147
Firmware Name: UTS6710_100.bin
Firmware Type: USB upgradeable
Remote Type: M90
Note: The following T.SK105A.03 firmware/software is USB upgradeable. Download the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download T.SK105A.03 Firmware files:
Download your required T.SK105A.03 resolution file and then extract them you will get the folder. Now copy the bin and text files to USB. For more Details about the download process watch the video Click Here
T.SK105A.03 Firmware All resolutions Free Download:
STARWIND SW-LED32R301BT2 is a 32 inches HD Ready LED TV with a resolution of 1366×768. SW-LED32R301BT2 is a non-smart tv. SW-LED32R301BT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.
Its view angle is STARWINDal: 170 degrees and vertical: 160 degrees. SW-LED32R301BT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. STARWIND Software file is given below for the technician’s support. For more STARWIND Software collection visit here.
General Specifications & Features:
Make: STARWIND
Model: SW-LED32R301BT2
Display Size: 32″
Storage Memory: MB
HD Technology: HD
Panel: HD
No of HDMI Ports:
No of USB Ports:
No of AV Ports:
Speaker Output RMS:
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: W, 0.5 W (Standby)
Software Type: Backup Dump
Software Name:
Main Board:
Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
